SPDP50D375-503 Datasheet, PDF (1/10 Pages) Sensitron – DC Solid State Power Controller Module

SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATASHEET 5065, A
SPDP50D375-503
DC Solid State Power Controller Module
Description:
This product is a Solid State Power Controller (SSPC) Modules; the electronic equivalent to electromechanical
circuit breakers with isolated control and status. It is designed to operate with minimal heatsink requirements.
It is a microcontroller-based Solid State Relays rated up to 50A designed to be used in high reliability 375V
DC applications. These modules have integrated current sensing with no derating over the full operating
temperature range.
This product is programmable with a simple jumper configuration connector in steps as 30A / 40A / 50A.
The product series also allows programming the Instant Trip level at three different levels: 150A, 200A and
250A.The Battle Override that allows the protection to be turned off is a standard option.
Compliant Documents & Standards:
MIL-STD-704F
Aircraft Electrical Power Characteristics, 12 March 2004
MIL-STD-217F, Notice 2
Reliability Prediction of Electronic Equipment, 28 Feb 1995
Module Features:
• Minimal heat sinking or external cooling required
• Extremely Low Power Loss, No Derating Over the Full Temperature Range
• IMS Base Plate construction
• Solid State Reliability
• High Power Density
• Silver plated contacts for buss bars
• Gold over nickel plated base plate
• Sub D connector shell is steel with 30u” gold plated socket contacts
• Passivated Steel hardware on power terminals
Electrical Features:
• 375VDC Input with Very Low Voltage Drop; 400mV, typ. @ 50A, 25⁰C
• True I²t Protection up to 6X rating with Nuisance Trip Suppression
• I²t Protection level externally programmable
• Instant Trip Protection level externally programmable
• Reports Loss of Line Voltage
• Reports Over Temperature condition and turns off during this condition
• Output Leakage Sink for safe output voltage when SPDP50D375 turned off
• No trip operation upto 1000µF of output capacitance
• Instant Trip Protection (40 μsec typ) for Loads Above programmed Instant Trip level
• Unlimited Interrupt Capability; Repetitive Fault Handling Capability
• Thermal Memory
• Internally Generated Isolated Supply to Drive the Switch
• Low Bias Supply Current: 20 mA typ @ 5V DC
• High Control Circuit Isolation: 750V DC Control to Power Circuit
• Soft Turn-On to Reduce EMC Issues
• EMI Tolerant
• Module Reset with a Low Level Signal; Reset Circuit is Trip-Free
• TTL/CMOS Compatible, Optically Isolated, Input and Outputs
• Schmitt-Trigger Control Input for Noise Immunity
• 221 West Industry Court  Deer Park, NY 11729-4681  Phone [phone] Fax [phone] •
• World Wide Web - http://www.sensitron.com • E-Mail Address - [e-mail] • Page 1