SEN-R-1034-XXX Datasheet, PDF (1/3 Pages) Sensitron – TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT SERIES GLASS PASSIVATED DIE PLUS DUAL HEAT STRIPS

SENSITRON
SEMICONDUCTOR
TECHNICAL DATA SHEET 4198, REV. -
SEN-R-1034-XXX
TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT SERIES
GLASS PASSIVATED DIE PLUS DUAL HEAT STRIPS
FEATURES
• Low Profile
• Broad Voltage Range Available - - 6.8 to 440 V
• Broad Spectrum Transient Suppression
• 1500W Surge Capability at 1 ms
• Built-in Heat Absorbing Terminations
• Electrically Similar to MIL-PRF -19500/516
APPLICATIONS
• Connector I/O Surge Suppression
• Data Line Protection
DESCRIPTION
This is a bipolar transient voltage suppressor
series extending from 6.8 volts to 440 volts
intended for surface mount applications.
Each device comes as a “Cell” with its own heat
absorbing terminals pre-bonded at high
temperature. This permits mounting on printed
circuit boards that cannot provide their own heat
sinking. Each terminal is silver plated and is
solderable permitting solder down attachment with
a very small footprint. Each unit is bi-symmetrical
so any orientation can be used.
ELECTRICAL CHARACTERISTICS
PARAMETER
SYMBOL
Peak Pulse Power
Pppm
Electrical Parameters
Test Conditions
TA = 25 8C, Tp = 1 ms (Note 1)
Min
1500
TYP
See Table
Maximum Solder Temperature
Tmax
10 Second exposure
Operating & Storage Tempature
Tj, Tstg
-55
Note 1: Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 8C per Fig. 2.
Max
250
175
Unit
Watts
8C
8C
0.078”
0.082”
0.034”
0.040”
0.0115”
0.0155”
0.031”
Typ
0.112”
0.116”
0.174”
0.178”
0.112”
0.116”
Note: “Die only configuration requires user to provide adequate energy absorption.
• 221 West Industry Court • Deer Park, NY 11729-4681 • Phone [phone] • Fax [phone] •
• World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.c om •