RG3J-10 Datasheet, PDF (1/2 Pages) SEMTECH ELECTRONICS LTD. – GLASS PASSIVATED JUNCTION RECTIFIER

RG3J-10
GLASS PASSIVATED JUNCTION RECTIFIER
Forward Current – 3.0 Amperes
Features
• Cavity-free glass passivated junction
• High temperature metallurgically bonded construction
• High temperature soldering guaranteed:
350^oC/10 seconds,0.375”(9.5mm) lead length,
5 lbs, (2.3kg) tension
Mechanical Data
• Case: Solid glass body.
• Terminals: Solder plated axial leads, solderable per
MIL-STD-750.Method 2026.
• Polarity: Color band denotes cathode end.
• Mounting Position: Any
• Weight: 0.04 ounce, 1.1 grams.
Absolute Maximum Ratings and Characteristics Ratings at 25⁰C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
0.375” (9.5mm) lead length at TA=70 ^OC
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC method)
Symbols
VRRM
VRMS
VDC
IF(AV)
IFSM
Value
400
280
400
3
125
Units
Volts
Volts
Volts
Amps
Amps
Maximum full load reverse current, full cycle average,
0.375”(9.5mm)lead length at TA=70 ^OC
Maximum instantaneous forward voltage at 3A TA = 25 ^OC
Maximum DC reverse current
at rated DC blocking voltage
TA = 25 ^OC
TA = 175^OC
Typical junction capacitance at 4V, 1MHz
Typical thermal resistance (Note 1)
Operating junction temperature range
Storage temperature range
IR(AV)
VF
IR
CJ
R_θJA
R_θJL
TJ
TS
150
1.3
5
300
40
20
10
-65 to+175
-65 to+200
µA
Volts
µA
pF
O_C/W
O_C
O_C
Notes: (1) Thermal resistance from junction to ambient and from junction to lead at 0.375”(9.5mm) lead length with both leads
attached between heat sink.
SEMTECH ELECTRONICS LTD.
(Subsidiary of Semtech International Holdings Limited, acompany
®
listed on the Hong Kong Stock Exchange, Stock Code: 724)
Dated : 23/06/2003