KBU10005 Datasheet, PDF (1/2 Pages) Fuji Electric – 10 AMP SILICON BRIDGE RECTIFIER

KBU10005 THRU KBU1010
SINGLE-PHASE SILICON BRIDGE RECTIFIER
REVERSE VOLTAGE: 50 to 1000 V
FORWARD CURRENT: 10 A
Features
• Reliable low cost construction utilizing molded
plastic technique
• Low forward voltage drop
• Low reverse leakage current
• High surge current capability
• Ideal for printed circuit board
Mechanical Data
• Case: Molded plastic, KBU
• Epoxy: UL 94V-0 rate flame retardant
• Terminals: leads solderable per MIL-STD-202,
Method 208 guaranteed
• Mounting Position: Any
Absolute Maximum Ratings and Characteristics
Ratings at 25 ^OC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or
inductive load. For capacitive load, derate current by 20%.
Parameter
Symbols KBU10005 KBU1001 KBU1002 KBU1004 KBU1006 KBU1008 KBU1010 Units
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100 200 400 600 800 1000 V
Maximum RMS Voltage
VRMS
35
70
140 280 420 560 700
V
Maximum DC Blocking Voltage
VDC
50
100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
I(AV)
0.375"(9.5 mm) Lead Length at T_A = 55 ^OC
Peak Forward Surge Current 8.3 ms Single Half-Sine
IFSM
-Wave Superimposed on Rated Load (JEDEC Method)
Maximum Forward Voltage at 10 A
VF
Maximum Reverse Current
TA = 25 ^OC
IR
at Rated DC Blocking Voltage
TA = 100 ^OC
Typical Thermal Resistance ¹⁾
RθJA
Typical Thermal Resistance ²⁾
RθJC
10
A
300
A
1.1
V
10
µA
500
18
O_C/W
3
O_C/W
Operating and Storage Temperature Range
T_J ,T_S
- 55 to + 125
O_C
1) _{Units mounted in free air, no heatsink, P.C.B at 0.375" (9.5 mm) lead length with 0.5 X 0.5" (12 X 12 mm) copper pads.}
2) _{Units mounted on a 3 X 3 X 0.11" (7.5 X 7.5 X 0.3 cm) thick Al. plate heatsink.}
SEMTECH ELECTRONICS LTD.
(Subsidiary of Semtech International Holdings Limited, a company
listed on the Hong Kong Stock Exchange, Stock Code: 724)
R
Dated : 01/08/2006 H