KBPC50005 Datasheet, PDF (1/2 Pages) Dc Components – TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER

KBPC50005 THRU KBPC5010
HIGH CURRENT SINGLE-PHASE BRIDGE RECTIFIERS
REVERSE VOLTAGE: 50 TO 1000 VOLTS
FORWARD CURRENT: 50 AMPERES
Features
• Low power loss, high efficiency
• Low reverse leakage current
KBPC
Absolute Maximum Ratings and Characteristics
Rating at 25^oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive
load, For capacitive load, derate current by 20%.
KBPC KBPC KBPC KBPC KBPC KBPC KBPC
Symbols
Units
50005 5001 5002 5004 5006 5008 5010
Maximum repetitive peak reverse voltage
V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage
V_RMS
35
70 140 280 420 560 700 V
Maximum DC blocking voltage
V_DC
Average forward rectified current at T_C = 55^OC
I_O
Peak forward surge current, 8.3ms single half sine
wave superimposed on rated load ( JEDEC)
I_FSM
Maximum forward voltage at 25A DC and 25℃
V_F
Maximum reverse current
T_A = 25^OC
at rated DC blocking voltage
T_A = 125^OC
I_R
50 100 200 400 600 800 1000 V
50
A
400
A
1.2
V
10
µA
1000
Typical junction capacitance (note 1)
C_j
300
pF
Typical thermal resistance (note 2)
Operating junction and storage temperature range
Rθ_JC
T_J ,T_STG
2.6
-55 to +150
O_C/W
O_C
Notes:
1. Measured at 1.0MHz and applied reverse voltage of 4.0 V.DC
2. Thermal resistance from junction to case per leg.
SEMTECH ELECTRONICS LTD.
(Subsidiary of Semtech International Holdings Limited, acompany
listed on the Hong Kong Stock Exchange, Stock Code: 724)
®
Dated : 19/07/2005