KBL4005 Datasheet, PDF (1/2 Pages) Daesan Electronics Corp. – CURRENT 4.0 Amperes VOLTAGE 50 to 1000 Volts

KBL4005 THRU KBL410
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIERS
VOLTAGE RANGE: 50 TO 1000 VOLTS
CURRENT: 4.0 AMPERES
Features
• Surge overload rating: 200 amperes peak
• Ideal for printed circuit board application
Mechanical Data
• Mounting position: Any
Absolute Maximum Ratings and Characteristics
Rating at 25^oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or
inductive load, For capacitive load, derate current by 20%.
KBL KBL KBL KBL KBL KBL KBL
Symbols
Units
4005 401 402 404 406 408 410
Maximum repetitive peak reverse voltage
V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage
Average rectified output current at T_A = 50^OC
V_DC
50 100 200 400 600 800 1000 V
I_O
4.0
A
Non-repetitive Peak forward surge current
8.3ms single half sine wave superimposed
on rated load (JEDEC Method)
I_FSM
200
A
Maximum instantaneous forward voltage drop per leg
at 4.0A DC
V_F
Maximum DC reverse current
at rated DC blocking voltage per leg
T_A = 25^OC
T_A = 100^OC
I_R
1.0
V
10
µA
1.0
mA
Typical junction capacitance(note)
C_j
40
pF
Operating junction temperature range
T_J
-55 to +125
O_C
Storage temperature range
T_STG
-55 to +150
O_C
Notes: Measured at 1.0MHz and applied reverse voltage of 4.0V.DC
SEMTECH ELECTRONICS LTD.
(Subsidiary of Semtech International Holdings Limited, acompany
listed on the Hong Kong Stock Exchange, Stock Code: 724)
®
Dated : 21/04/2003