2W005G Datasheet, PDF (1/2 Pages) Zowie Technology Corporation – SINTERED GLASS PASSIVATED BRIDGE RECTIFIER

2W005G THRU 2W10G
GLASS PASSIVATED BRIDGE RECTIFIERS
Reverse Voltage – 50 to 1000 Volts
Forward Current – 2.0 Amperes
Features
• Rating to 1000V PRV
• Ideal for printed circuit board
• Low forward voltage drop, high current capability.
• Reliable low cost construction utilizing molded
epoxy technique results in inexpensive product
Mechanical Data
• Case: Molded plastic
• Polarity: As marked on Body
• Mounting position: Any
Aboslute Maximum Ratings and Characteristics
Ratings at 25^oCambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Symbols 2W005G 2W01G 2W02G 2W04G 2W06G 2W08G 2W10G Units
Maximum recurrent peak reverse voltage
VRRM
50
100 200 400 600 800 1000 V
Maximum RMS voltage
VRMS
35
70
140 280 420 560 700
V
Maximum DC blocking voltage
VDC
50
100 200 400 600 800 1000 V
Maximum average forward rectified current
at TA = 25 ^OC
I(AV)
2
A
Peak forward surge current ,
8.3ms single half sine-wave superimposed
IFSM
60
A
on rated load (JEDEC METHOD)
Maximum forward voltage at 2.0A DC
VF
Maximum DC reverse current
at rated DC blocking voltage
@ TJ = 25 ^OC
@ TJ =125 ^OC
IR
1.1
V
5
µA
500
Typical junction capacitance per element (Note 1) CJ
25
pF
Typical thermal resistance (Note 2)
R_θJA
Operating temperature range
TJ
40
-55 to +150
o_C/W
O_C
Storage temperature range
TS
-55 to +150
O_C
Notes: (1) Measured at 1MHz and appliad reverse voltage of 4V DC.
(2) Thermal resistance junction to ambient.
SEMTECH ELECTRONICS LTD.
(Subsidiary of Semtech International Holdings Limited, acompany
®
listed on the Hong Kong Stock Exchange, Stock Code: 724)
Dated : 23/06/2003