English
Language : 

1F1 Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – FAST SWITCHING PLASTIC RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere)
1F1 THRU 1F7
MINIATURE FAST RECOVERY RECTIFIER
Reverse Voltage - 50 to 1000 V
Forward Current - 1 A
Features
• High current capability
• High reliability
• Low forward voltage drop
• Low leakage
• High switching capability
Mechanical Data
• Case: Molded plastic, R-1
• Epoxy: UL 94V-0 rate flame retardant
• Lead: Axial leads, solderable per MIL-STD-202,
Method 208 guaranteed
• Polarity: color band denotes cathode end
• Mounting Position: Any
Absolute Maximum Ratings and Characteristics
Ratings at 25 OC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Parameter
Symbols 1F1 1F2 1F3 1F4 1F5 1F6 1F7 Units
Maximum Recurrent Peak Reverse Voltage
VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
VRMS
35 70 140 280 420 560 700
V
Maximum DC Blocking Voltage
VDC
Maximum Average Forward Rectified Current
0.375" (9.5 mm) Lead Length at TA = 55 OC
I(AV)
Peak Forward Surge Current, 8.3 ms Single Half-
50 100 200 400 600 800 1000 V
1
A
Sine-Wave Superimposed on Rated Load
IFSM
25
A
(JEDEC Method)
Maximum Forward Voltage at 1 A DC
VF
1.3
V
Maximum Reverse Current
at Rated DC Blocking Voltage
TA = 25 OC
TA = 100 OC
IR
Typical Junction Capacitance 1)
CJ
Typical Thermal Resistance 2)
RθJA
Maximum Reverse Recovery Time 3)
trr
5
µA
500
12
pF
67
OC/W
150
250
500
nS
Operating and Storage Temperature Range
TJ, Tstg
- 55 to + 150
OC
1) Measured at 1 MHz and applied reverse voltage of 4 V DC.
2) Thermal resistance from junction to ambient 0.375" (9.5 mm) lead length P.C.B. mounted with 0.22 X 0.22" (5.5 X 5.5
mm) copper pads.
3) Reverse recovery test conditions: IF = 0.5 A, IR = 1 A, Irr = 0.25 A
SEMTECH ELECTRONICS LTD.
(Subsidiary of Sino-Tech International Holdings Limited, a company
listed on the Hong Kong Stock Exchange, Stock Code: 724)
®
Dated : 03/04/2007 H