EZ1580_10 Datasheet, PDF (5/6 Pages) Semtech Corporation – Dual Input Low Dropout Regulator

EZ1580/EZ1581
EZ1582/EZ1583
POWER MANAGEMENT
Applications Information
The EZ158X is a low dropout regulator designed to power
low voltage microcontrollers, graphics ICs, sound cards
etc.
The dropout voltage is minimized by utilizing a separate
input voltage, V_CTL, which should exceed V_OUT by at least
1.3V. The 2.5V (for example) power for the load can be
derived from a 3.3V system supply. Since the efficiency
of a linear regulator is the ratio of the output to the input
voltage, heat dissipation is reduced by using a 3.3V input
(versus a 5V one), thereby lowering heatsink and cooling
fan costs. For lower current applications, the heatsink
might be eliminated altogether. For a load of 7A at 2.5V,
the regulator would dissipate 17.5W when converting from
5V, but only 5.6W from a 3.3V input.
Remote Kelvin sensing of the output voltage can be
achieved by connecting the sense pin to the output at
the load. Remote sensing will reduce errors associated
with resistive trace losses between regulator and
processor.
Outline Drawing - TO-220-5
A
E2
Q
D
D1
L
E
E/2
ØP
aaa B A
B
SEATING
PLANE
A
A1
H1
D2
C
c
e
A2
5X b
bbb B A
DIMENSIONS
DIM
INCHES
MIN NOM MAX
MILLIMETERS
MIN NOM MAX
A .140 - .190 3.56 - 4.82
A1 .020 - .055 0.51 - 1.40
A2 .080 - .115 2.03 - 2.92
b .025 .031 .041 0.63 0.80 1.04
c .014 - .024 0.36 - 0.61
D .560 - .650 14.22 - 16.51
D1 .330 - .355 8.38 - 9.02
D2 .480 - .507 12.19 - 12.88
E .380 - .420 9.65 - 10.66
E1 .270 - .350 6.86 - 8.90
E2 -
- .030 -
- 0.76
e
.067 BSC
1.70 BSC
H1 .230 - .270 5.84 - 6.86
L .500 ^- .580 12.70 ^- 14.73
N
5
5
ØP .139 - .156 3.53 - 3.96
Q .100 - .120 2.54 - 3.05
aaa
.014
0.36
bbb
.015
0.38
ccc
.010
0.25
E1
ccc
BA
NOTES:
1. CONTROLLING DIMENSIONS ARE IN INCHES.
2. DIMENSIONS "D" AND "E" DO NOT INCLUDE MOLD FLASH, PROTRUSIONS
OR GATE BURRS.
Outline Drawing - TO-263-5
A
0
E
E/2
L1
12345
D
H
SEATING
PLANE
B
bXN
e
aaa B A
A
A1
DIMENSIONS
DIM
INCHES
MIN NOM MAX
MILLIMETERS
MIN NOM MAX
A .160 - .190 4.06 - 4.83
A1 .000 - .010 0.00 - 0.25
b .020 - .039 0.51 - 0.99
c .015 - .029 0.38 - 0.74
c1 .045 - .065 1.14 - 1.65
D .326 - .380 8.28 - 9.65
D1 .270 -
- 6.86 -
-
E .380 - .420 9.65 - 10.67
E1 .245 -
- 6.22 -
-
H .575 - .625 14.61 - 15.88
e
.067 BSC
1.70 BSC
L .070 - .110 1.78 - 2.79
L1 -
- .066 -
- 1.68
N
5
5
0 - 15
-
- 15
-
01 0
-
8
0
-
8
aaa
.010
0.25
PLATED COPPER
HEAT SPREADER
c1
SIDE VIEW
SEE DETAIL A
D1
(L1)
c
E1
NOTES:
L
01
DETAIL A
1. CONTROLLING DIMENSIONS ARE IN INCHES (ANGLES IN DEGREES).
2. DIMENSIONS "D" AND "E" DO NOT INCLUDE MOLD FLASH, PROTRUSIONS
OR GATE BURRS.
 2005 Semtech Corp.
5
www.semtech.com