GV8601 Datasheet, PDF (4/16 Pages) Semtech Corporation – Adaptive Cable Equalizer

Table 1-1: GV8601 Pin Descriptions (Continued)
Pin Number
10, 11
Name
SDO, SDO
Timing
Analog
Type
Output
12
VEE_D
Analog
Power
13
VCC_D
Analog
Power
14
MUTE
Not
Synchronous
Input
15
CD
Not
Synchronous
Output
16
VCC_A
Analog
Power
–
Center Pad
–
Power
Description
Equalized serial digital differential output.
Most negative power supply for the digital circuitry and output
buffer.
Connect to GND.
Most positive power supply for the digital I/O pins of the device.
Connect to +3.3V DC.
CONTROL SIGNAL INPUT
levels are LVCMOS/LVTTL compatible. (3.3V Tolerant)
Controls output behaviour on SDO and SDO. (Internal pull-down).
See Section 4.4.
STATUS SIGNAL OUTPUT
Signal levels are LVCMOS/LVTTL compatible.
Indicates the presence of an input signal.
See Section 4.4.
Most positive power supply for the analog circuitry of the device.
Connect to +3.3V DC.
Internally bonded to VEE_A.
GV8601 Adaptive Cable Equalizer
Final Data Sheet
Rev. 1
November 2012
4 of 16