EZ1584C Datasheet, PDF (4/5 Pages) Semtech Corporation – 7.0 AMP LOW DROPOUT POSITIVE VOLTAGE REGULATORS

POWER MANAGEMENT
Pin Configuration
EZ1584C & EZ1584I
Ordering Information
Device⁽¹⁾⁽²⁾
Package
EZ1584CT-X.X
EZ1584IT-X.X
TO-220⁽³⁾
Notes:
(1) Where X.X denotes voltage options. Available voltages
are: 1.5V, 2.5V and 3.3V for EZ1584C and 3.3V only for
EZ1584I. Leave blank for adjustable version (1.3V to
5.7V). Contact factory for additional voltage options.
(2) Where C and I denote Commercial (0°C to 70°C)
and Industrial (-40°C to 85°C) ambient temperature
ranges.
(3) Only available in tube packaging. A tube contains 50
devices.
Pin Descriptions
Pin Pin Name Pin Function
1
ADJUST This pin is the negative side of the reference voltage for adjustable devices. Transient response
can be improved by adding a small bypass capacitor from the adjust pin to ground.
GROUND This pin is the bottom end of the internal resistor feedback chain for fixed output voltage parts, and
should be connected to ground.
2
OUTPUT This is the power output of the device and is electrically connected to the TAB.
3
INPUT This is the input supply pin for both the control circuitry and the pass device.
Block Diagram
 2001 Semtech Corp.
4
www.semtech.com