EZ1086C_16 Datasheet, PDF (4/6 Pages) Semtech Corporation – 1.5 Amp Positive Voltage Regulator

EZ1086C & EZ1086I
POWER MANAGEMENT
Pin Configurations
Ordering Information
Device⁽¹⁾⁽²⁾
EZ1086CM-X.X.TR
EZ1086IM.TR
EZ1086CM-X.XTRT⁽⁵⁾
Package
TO-263⁽³⁾
EZ1086CT-X.X
EZ1086IT
EZ1086CT-X.XT⁽⁵⁾
TO-220⁽⁴⁾
Notes:
(1) Where X.X denotes voltage options (EZ1086C only).
Available voltages are: 2.5V, 3.3V and 3.45V. Leave blank
for adjustable version (1.3 to 5.7V). Contact factory for
additional voltage options.
(2) Where C and I denote Commercial (0°C to 70°C)
and Industrial (-40°C to 85°C) ambient temperature
ranges.
(3) Only available in tape and reel packaging. A reel
contains 800 devices.
(4) Only available in tube packaging. A tube contains 50
devices.
(5) This product is RoHS compliant.
Pin Descriptions
Pin Pin Name Pin Function
1
ADJUST This pin is the negative side of the reference voltage for adjustable devices. Transient response
can be improved by adding a small bypass capacitor from the adjust pin to ground.
GROUND This pin is the bottom end of the internal resistor feedback chain for fixed output voltage parts, and
should be connected to ground.
2
OUTPUT This is the power output of the device and is electrically connected to the TAB.
3
INPUT This is the input supply pin for both the control circuitry and the pass device.
Block Diagram
 2006 Semtech Corp.
4
www.semtech.com