EZ1086BC Datasheet, PDF (4/5 Pages) Semtech Corporation – 1.5 AMP POSITIVE VOLTAGE REGULATOR

October 3, 2000
BLOCK DIAGRAM
1.5 AMP POSITIVE
VOLTAGE REGULATOR
EZ1086BC, EZ1086C
& EZ1086I
PIN CONFIGURATIONS
PIN DESCRIPTIONS
Pin Pin Name
Pin Function
1 ADJUST / This pin is the negative side of the reference voltage for adjustable devices. Transient response
can be improved by adding a small bypass capacitor from the adjust pin to ground.
GROUND This pin is the bottom end of the internal resistor feedback chain for fixed output voltage parts,
and should be connected to ground.
2 OUTPUT This is the power output of the device, and is electrically connected to the TAB.
3 INPUT This is the input supply pin for both the control circuitry and the pass device.
© 2000 SEMTECH CORP.
4
652 MITCHELL ROAD NEWBURY PARK CA 91320