SC189 Datasheet, PDF (2/23 Pages) Semtech Corporation – 2.5MHz, 1.5A Synchronous Step Down Regulator

SC189
Pin Configuration
NC ¹
EN 2
VIN 3
TOP VIEW
T
6 VOUT
5 GND
4 LX
2mm x 2mm x 0.6mm MLPD-UT6
θ_JA = 60°C/W⁽¹⁾
VIN ¹
5 LX
GND 2
TOP VIEW
EN ³
4 VOUT
SOT23-5
θ_JA = 90°C/W⁽¹⁾
Marking Information
FLx
Ordering Information
Device
Package & Description
SC189xULTRT^(2)(3)(4) 2mm x 2mm x 0.6mm MLPD-UT6
SC189xSKTRT^2)(3)(4)
SOT23-5
SC189xEVB⁽⁵⁾
Evaluation Board for MLPD-UT6
- Standard Size
(i.e., Wire Wound Inductor)
SC189xEVB-1⁽⁵⁾
Evaluation Board for MLPD-UT6
- Small Size
(i.e., Chip Inductor)
SC189xEVB-2⁽⁵⁾
Evaluation Board for SOT23-5
- Standard Size
(i.e., Wire Wound Inductor)
SC189xEVB-3⁽⁵⁾
Evaluation Board for SOT23-5
- Small Size
(i.e., Chip Inductor)
Notes:
(1) Measured in free convection, mounted on 10mm x 10mm, 2 layer
FR4 PCB shown in figure 7 ( for MLPD-UT6 package) and figure 8 (
for SOT23-5 package) with copper of 1oz for each layer.
(2) Available in tape and reel only. A reel contains 3,000 devices.
(3) Available in lead-free package only. Device is WEEE and RoHS
compliant.
(4) “x” is the code of the output voltage. See Table 1 for the code. For
example, the device number for VOUT= 1.20V is SC189CULTRT.
(5) “x” is the code of the output voltage. See Table 1 for the code.
For example, the EVB for MLPD-UT6 package with VOUT= 1.20V is
SC189CEVB (Standard Size) or SC189CEVB-1 (Small Size).
Marking for 2mm x 2mm MLPD-UT 6 Lead Package:
x = Code of the output voltage (Example: C for VOUT=1.20V)
oyw = Pin 1 and Datecode (Reference Package Marking Design
Guidelines, Appendix A)
Top Mark
Bottom Mark
189^x
Marking for SOT23, 5 Lead Package:
x = Code of the output voltage (Example: C for VOUT=1.20V)
yyww = Datecode (Example: 0852)
Table 1: Available Output Voltages
Code
Code
for MLPD-UT6 for SOT23-5
VOUT⁽¹⁾
A
A
1.00
B
B
1.10
C
C
1.20
E
Not Available
1.28
F
Not Available
1.30
H
H
1.50
L
L
1.80
N
Not Available
2.00
T
Y
2.50
Not Available
V
2.70
Z
Z
3.30
Notes:
(1) Contact factory for unavaliable output voltage options.
© 2009 Semtech Corp.

www.semtech.com