CFPT-5300 Datasheet, PDF (2/3 Pages) Semtech Corporation – The CFPT-5300 series of temperature compensated crystal oscillators

Environmental Specification
I Bump: IEC 60068-2-29, Test Eb, 4000 ±10 bumps at
390m/s² in each of the three mutually perpendicular
axes
I Shock: IEC 60068-2-27 Test Ea, 980m/s² acceleration for
6ms duration, 3 shocks in each direction along
three
mutually perpendicular axes
I Solderability: IEC 60068-2-20,Test T, method 1
(solder bath): Temperature 235°C
I Vibration: IEC 60068-2-6 Test Fc Procedure B4,
10-60Hz 1.5mm displacement, 60-2000Hz at 98.1
m/s², 30 minutes in each of three mutually
perpendicular axes at 1 octave per minute
I Damp Heat (steady state): IEC 60068-2-3, Test Ca,
Duration 56 days
I Robustness of Termination: IEC 60068-2-21, Test
Ua (tensile): Force 1Kg
I Sealing: IEC 60068-2-17, Test Qc (gross) & test Qk (fine)
I Marking: Heat cured epoxy ink, engraving or label
I Immersion in Solvents: IEC 60068-2-45, Test Xa
Marking Includes
I C-MAC
I Part Number (E and four digits)
I Frequency (MHz)
I Pin 1 / Static sensitivity identified (Triangle)
I Date Code and manufacturing location code (YYWWL)
Minimum Order Information Required
I Frequency + Model Number + Frequency Stability Vs
Operating Temperature Code + Frequency Adjustment
Code
OR
I Discrete part number for repeat orders
Please supply full information for non-standard options, if
required
Outline in mm
∅0.41
Pin Connections
1. Frequency Adjust
(do not connect if
Frequency Adjust
option C has
been selected)
7. GND
8. Output
14. +Vs
1
7
14 8
15.24
20.7 max
Output Waveform - HCMOS
tf
90% (VoH-VoL)
tr
+Vs
VoH
50% (VoH-VoL)
10% (VoH-VoL)
VoL
0V
t
T
Duty cycle = t x 100(%)
T
Test Circuit - HCMOS
Voltage
Control
or
A
+Vs
Oscillator
17
14 8
V
0.1µF 15pF*
77
Oscilloscope
Frequency counter