UCLAMP3601P Datasheet, PDF (1/7 Pages) Semtech Corporation – TVS Diode for Proximity Switch Input Protection

PROTECTION PRODUCTS - MicroClamp^®
Description
The µClamp^®3601P is a high-surge transient voltage
suppressor (TVS) optimized for protection of sensitive
digital sensors used in proximity switches and industrial
control applications. The µClamp3601P protects the
components from over-voltages caused by Electro-
Static Discharge (ESD), Electrical Fast Transients
(EFT), and Tertiary Lightning.
The µClamp3601P features a working voltage of 33
volts with a minimum breakdown voltage of 34 volts.
They are rated to handle a continuous forward current
of up to 260mA with a low forward voltage drop of less
than 1 volt (IF = 200mA). They are designed with high
surge capability (2 Amps at t_p=1.2/50us) and a low
clamping voltage of <60V.
The µClamp3601P is in an 2-pin SLP1006P2 package.
It measures 1.0 x 0.6 x 0.5mm. The leads are spaced
at a pitch of 0.65mm and are finished with lead-free
NiPdAu. Each device will protect one line operating at
33 volts. The small size and unique features of the
µClamp3601P make it ideal for protection of DC high-
side proximity switches in industrial and automotive
applications.
The µClamp3601P is qualified to AEC-Q100 Grade1.
Dimensions
µClamp3601P
TVS Diode for Proximity
Switch Input Protection
Features
‹ Transient protection for data and power lines to
IEC 61000-4-2 (ESD) ±20kV (air), ±15kV (contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
IEC 61000-4-5 (Lightning) 2A (1.2/50µs)
‹ Ultra-small package
‹ Bidirectionally protects one data line
‹ Low clamping voltage
‹ Working voltage: 33V
‹ Low leakage current
‹ Solid-state silicon-avalanche technology
‹ Qualified to AEC-Q100 Grade1
Mechanical Characteristics
‹ SLP1006P2 package
‹ Pb-Free, Halogen Free, RoHS/WEEE Compliant
‹ Nominal Dimensions: 1.0 x 0.6 x 0.5 mm
‹ Lead Finish: NiPdAu
‹ Molding compound flammability rating: UL 94V-0
‹ Marking: Marking code, cathode band
‹ Packaging: Tape and Reel
Applications
‹ Two, Three, and Four Wire DC High-Side Proximity
Switches
‹ Digital Sensor Input Protection
‹ Industrial Controls
‹ 24V - 33V DC Supply Protection
‹ Automotive Applications
Schematic & Pin Configuration
1.0
0.60
2
0.65
0.50
1
Maximum Dimensions (mm)
SLP1006P2 (Bottom View)
1/19/2012
1
www.semtech.com