UCLAMP2501T Datasheet, PDF (1/7 Pages) Semtech Corporation – Low Voltage Clamp 2.5V TVS Diode

PROTECTION PRODUCTS _{- MicroClamp}^®
Description
The μClamp^® series of Transient Voltage Suppressors
(TVS) are designed to replace multilayer varistors
(MLVs) in portable applications such as cell phones,
notebook computers, and PDAs. They offer superior
electrical characteristics such as lower clamping
voltage and no device degradation when compared to
MLVs. They are designed to protect sensitive semicon-
ductor components from damage or upset due to
electrostatic discharge (ESD), lightning, electrical fast
transients (EFT), and cable discharge events (CDE).
The μClamp^®2501T is constructed using Semtech’s
proprietary EPD TVS process technology. The EPD
process provides low operating voltages with significant
reductions in leakage currents and capacitance over
silicon-avalanche diode processes. They feature a true
sub 5 volt operating voltage for superior protection
when compared to traditional pn junction devices.
The μClamp2501T is in a 2-pin SLP1006P2T package.
It measures 1.0 x 0.6 x 0.4mm. The leads are spaced
at a pitch of 0.65mm and are finished with lead-free
NiPdAu. Each device will protect one line operating at
2.5 volts. It gives the designer the flexibility to protect
single lines in applications where arrays are not practi-
cal. They may be used to meet the ESD immunity
requirements of IEC 61000-4-2, Level 4 (±15kV air,
±8kV contact discharge). The combination of small
size and high ESD surge capability makes them ideal
for use in portable applications such as cellular
phones, digital cameras, and MP3 players.
uClamp2501T
Low Voltage μClamp^®
2.5V TVS Diode
Features
‹ Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (tp = 5/50ns)
Cable Discharge Event (CDE)
‹ Ultra-small package (1.0 x 0.6 x 0.4mm)
‹ Low leakage current: <10nA typical (VR=2.5V)
‹ Low Operating voltage: 2.5V
‹ Low capacitance
‹ Protects one data line
‹ Solid-state silicon-avalanche technology
Mechanical Characteristics
‹ SLP1006P2T package
‹ Pb-Free, Halogen Free, RoHS/WEEE Compliant
‹ Nominal Dimensions: 1.0 x 0.6 x 0.4 mm
‹ Lead Finish: NiPdAu
‹ Molding compound flammability rating: UL 94V-0
‹ Marking : Marking code, cathode band
‹ Packaging : Tape and Reel
Applications
‹ Cellular Handsets & Accessories
‹ Portable Instrumentation
‹ Keypads, Side Keys, LCD Displays
‹ Notebooks & Desktop Computers
‹ mp3 Players
Dimensions
Schematic & PIN Configuration
1.0
0.60
2
0.65
0.40
Nominal Dimensions (mm)
Revision 10/21/2009
1
SLP1006P2T (Bottom View)
1
www.semtech.com