|
UCLAMP0508T Datasheet, PDF (1/8 Pages) Semtech Corporation – Low Profile μClampTM 8-Line ESD protection | |||
|
PROTECTION PRODUCTS - MicroClampTM
Description
The μClampTM series of TVS arrays are designed to pro-
tect sensitive electronics from damage or latch-up due
to ESD. It is designed to replace multilayer varistors
(MLVs) in portable applications such as cell phones, note-
book computers, and other portable electronics. It fea-
tures large cross-sectional area junctions for conducting
high transient currents. TVS diodes offer desirable char-
acteristics for board level protection including fast re-
sponse time, low operating and clamping voltage, and
no device degradation.
The μClampTM0508T is in a 8-pin, RoHS/WEEE compli-
ant, SLP1713P8T package. It measures 1.7 x 1.3 mm
with a nominal height of only 0.4mm. The leads are
spaced at a pitch of 0.4mm and are finished with lead-
free NiPdAu. Each device features eight TVS diodes
with an operating voltage of 5 volts and a maximum
loading capacitance of only 10pF.
They may be used to meet the ESD immunity require-
ments of IEC 61000-4-2, Level 4 (±15kV air, ±8kV
contact discharge). The combination of small size and
high ESD surge capability makes them ideal for use in
portable applications such as cellular phones, digital
cameras, and notebook computers.
uClamp0508T
Low Profile μClampTM
8-Line ESD protection
Features
 Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (tp = 5/50ns)
Cable Discharge Event (CDE)
 Ultra-small package
 Protects eight data lines
 Low clamping voltage
 Working voltage: 5V
 Low capacitance (10pF)
 Solid-state silicon-avalanche technology
Mechanical Characteristics
 SLP1713P8T package
 RoHS/WEEE Compliant
 Nominal Dimensions: 1.7 x 1.3 x 0.4 mm
 Lead Finish: NiPdAu
 Molding compound flammability rating: UL 94V-0
 Marking : Marking code
 Packaging : Tape and Reel
Applications
 Cellular Handsets & Accessories
 Notebooks & Handhelds
 Micro SD Ports
 MMC & HS-MMC Ports
 Portable Instrumentation
 Digital Cameras
 Peripherals
Dimensions
Schematic
1.70
123 4
1.30
1
2
3
4
5
6
7
8
8765
0.40 BSC
Tab
0.40
Nominal Dimensions (mm)
(SLP1713P8T Bottom View)
Revision 01/07/2008
1
www.semtech.com
|
▷ |