UCLAMP0506T Datasheet, PDF (1/7 Pages) Semtech Corporation – Low Profile Clamp 6-Line ESD Protection

PROTECTION PRODUCTS - MicroClamp^®
Description
The μClamp^® series of TVS arrays are designed to pro-
tect sensitive electronics from damage or latch-up due
to ESD. It is designed to replace single line devices such
as multilayer varistors (MLVs) in space constrained ap-
plications such as cell phones, notebook computers, and
other portable electronics. It features large cross-sec-
tional area junctions for conducting high transient cur-
rents. TVS diodes offer desirable characteristics for
board level protection including fast response time, low
operating and clamping voltage, and no device degrada-
tion.
The μClamp^®0506T is in a 6-pin SLP1313P6T package.
It measures 1.3 x 1.3 mm with a nominal height of only
0.4mm. The leads are spaced at a pitch of 0.4mm
and are finished with lead-free NiPdAu. Each device
features six TVS diodes with an operating voltage of 5
volts and a maximum loading capacitance of only 10pF.
They may be used to meet the ESD immunity require-
ments of IEC 61000-4-2, Level 4 (±15kV air, ±8kV
contact discharge). The combination of small size and
high ESD surge capability makes them ideal for use in
portable applications such as cellular phones, digital
cameras, and notebook computers.
uClamp0506T
Low Profile μClamp^®
6-Line ESD Protection
Features
‹ Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (tp = 5/50ns)
Cable Discharge Event (CDE)
‹ Ultra-small package
‹ Protects six data lines
‹ Low clamping voltage
‹ Working voltage: 5V
‹ Low capacitance (10pF)
‹ Solid-state silicon-avalanche technology
Mechanical Characteristics
‹ SLP1313P6T package
‹ Pb-Free, Halogen Free, RoHS/WEEE Compliant
‹ Nominal Dimensions: 1.3 x 1.3 x 0.4 mm
‹ Lead Finish: NiPdAu
‹ Molding compound flammability rating: UL 94V-0
‹ Marking : Marking code
‹ Packaging : Tape and Reel
Applications
‹ Cellular Handsets & Accessories
‹ Notebooks & Handhelds
‹ mp3 Players
‹ Cordless Phones
‹ Portable Instrumentation
‹ Digital Cameras
‹ Peripherals
Dimensions
Schematic
1.30
123
1.30
1
2
3
4
5
6
65 4
0.40 BSC
0.40
Nominal Dimensions (mm)
(SLP1313P6T Bottom View)
Revision 10/07/2009
1
Center Tab (GND)
www.semtech.com