UCLAMP0506P Datasheet, PDF (1/8 Pages) Semtech Corporation – μClampTM 6-Line ESD protection Array

PROTECTION PRODUCTS - MicroClamp^TM
Description
The µClamp^TM series of TVS arrays are designed to pro-
tect sensitive electronics from damage or latch-up due
to ESD. They are designed for use in applications where
board space is at a premium. Each device requires less
than 2.6mm² of PCB area and will protect up to six lines.
TVS diodes are solid-state devices designed specifically
for transient suppression. They feature large cross-sec-
tional area junctions for conducting high transient cur-
rents. They offer desirable characteristics for board level
protection including fast response time, low operating
and clamping voltage, and no device degradation.
The uClamp0506P is in a 6-pin, RoHS/WEEE compliant,
SLP1616P6 package. It measures 1.6 x 1.6 x 0.60mm.
The leads are spaced at a pitch of 0.5mm and are fin-
ished with lead-free NiPdAu. They may be used to meet
the ESD immunity requirements of IEC 61000-4-2, Level
4 (±15kV air, ±8kV contact discharge). The combination
of small size, low capacitance, and high ESD surge capa-
bility makes them ideal for use in portable electronics
such as cell phones, PDAs, notebook computers, and
digital cameras.
uClamp0506P
µClamp^TM
6-Line ESD protection Array
Features
‹ Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
‹ Protects six I/O lines
‹ Ultra-small package (1.6 x 1.6 x 0.6mm) requires
less than 2.6mm² of PCB area
‹ Working voltage: 5V
‹ Low leakage current
‹ Low operating and clamping voltages
‹ Solid-state silicon-avalanche technology
Mechanical Characteristics
‹ SLP1616P6 6L package
‹ RoHS/WEEE Compliant
‹ Nominal Dimensions: 1.6 x 1.6 x 0.60 mm
‹ Lead Finish: NiPdAu
‹ Molding compound flammability rating: UL 94V-0
‹ Marking: 0506P
‹ Packaging: Tape and Reel per EIA 481
Applications
‹ Cellular Handsets and Accessories
‹ Cordless Phones
‹ Personal Digital Assistants (PDAs)
‹ Portable Instrumentation
‹ Digital Cameras
‹ Peripherals
‹ MP3 Players
Circuit Diagram
PIN Configuration
1
2
3
4
5
6
1.6
1
1.6
6
0.5
0.6
Center Pad
Revision 04/17/2007
SLP1616P6 (Bottom View)
Nominal Dimensions in mm
1
www.semtech.com