TS13102 Datasheet, PDF (1/16 Pages) Semtech Corporation – Solid State Relay

TRIUNE PRODUCTS
Features
• Low Quiescent Operating Currents
2μA in OFF state
5μA in ON state
• Supports scalable galvanically-isolated I/O
• Addressable for minimum GPIO usage
Supports eight physical address configurations
• Single control signal for on/off input (CLK)
Microcontroller-compatible 1.7V to 5.5V input levels
Configurable switching options
• Switch Characteristics:
Bi-directional blocking in OFF state
Single switch device
60V switch and 290mΩ on-resistance
Up to 2.5A operating current
• Package Options
16 lead QFN package – 3x3mm, 1.0mm max height
• Operating Modes
Zero-cross ON / OFF
Immediate ON / OFF
Dithering Mode for system power sharing
Switch state polling
Summary Specification
• Junction operating temperature -40°C to 125°C
• Packaged in a 16 pin QFN (3x3)
• Product is lead-free, Halogen Free, RoHS / WEEE
compliant
Typical Application Circuit
Neo-Iso™ TS13102
Solid State Relay
with Enhanced Diagnostics
Description
The TS13102 is a galvanically isolated 60V power
switch device with bi-directional blocking. The
device includes a single integrated 290mΩ high
voltage switch allowing high efficiency switching of
power loads or other high current applications. The
single-pin CLK input pin controls the state of the
switch through sequence options which control the
way the device switches, including immediate on/off,
zero-volt switch-on, zero-current switch-off, dither
modes, as well as latching and non-latching
behavior.
The TS13102 includes several protection features.
Each switch has an integrated over-current shut-
down to prevent device damage during short-circuit
or other unusually high load conditions. If an over-
current event is detected for a time, the switch is
latched off until the CLK turn on sequence is given.
Applications
• Power load / rail switching
• Input supply multiplexing
• Isolated power supplies
• Solid state relays
• HVAC control
• Sprinkler control
• Internet of Things (IoT)
C VGG
C SYS
SYSP
SW1
DSW 1
AD0
V_AC
VCC
AD1
TS13102
AD2
C ISO
CLK
μC
DATA
C_{DAT A}
SW2
SYSM
DSW 2
C SUB
C_VDD
TS13102
Final Datasheet Rev 2.3
28 July 2016
1 of 16
Semtech
Proprietary & Confidential