|
SR2.8 Datasheet, PDF (1/7 Pages) Semtech Corporation – RailClamp® Low Capacitance TVS Diode Array | |||
|
PROTECTION PRODUCTS
Description
RailClamps are surge rated diode arrays designed to
protect high speed data interfaces. The SR series has
been specifically designed to protect sensitive compo-
nents which are connected to data and transmission
lines from overvoltage caused by electrostatic dis-
charge (ESD), electrical fast transients (EFT), and
tertiary lightning.
The unique design of the SR series devices incorpo-
rates four surge rated, low capacitance steering
diodes, and a TVS diode in a single package. The TVS
diode is constructed using Semtechâs proprietary low
voltage EPD technology for superior electrical charac-
teristics at 2.8 volts.
During transient conditions, the steering diodes direct
the transient to either the positive side of the power
supply line or to ground. The internal TVS diode pre-
vents over-voltage on the power line, protecting any
downstream components.
The low capacitance array configuration allows the user
to protect two high-speed data or transmission lines.
The low inductance construction minimizes voltage
overshoot during high current surges.
SR2.8
RailClampï
Low Capacitance TVS Diode Array
Features
 ESD protection to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
IEC 61000-4-5 (Lightning) 12A (8/20µs)
 Array of surge rated diodes with internal
EPD TVSï diode
 Protects two I/O lines
 Low capacitance (<10pF) for high-speed interfaces
 Low leakage current (< 1µA)
 Low operating voltage: 2.8V
 Solid-state technology
Mechanical Characteristics
 JEDEC SOT-143 package
 Molding compound flammability rating: UL 94V-0
 Marking : R2.8
 Packaging : Tape and Reel
Applications
 Firewire
 Sensitive Analog Inputs
 Video Line Protection
 Portable Electronics
 Microcontroller Input Protection
 WAN/LAN Equipment
Circuit Diagram
Pin 4
Pin 2
Pin 3
Revision 01/17/08
Pin 1
Schematic & PIN Configuration
4
1
2
3
SOT-143 (Top View)
1
www.semtech.com
|
▷ |