|
SMF05C_04 Datasheet, PDF (1/7 Pages) Semtech Corporation – TVS Diode Array For ESD and Latch-Up Protection | |||
|
PROTECTION PRODUCTS
Description
The SMF series TVS arrays are designed to protect sen-
sitive electronics from damage or latch-up due to ESD
and other voltage-induced transient events. They are
designed for use in applications where board space is at
a premium. Each device will protect up to five lines. They
are unidirectional devices and may be used on lines where
the signal polarities are above ground.
TVS diodes are solid-state devices designed specifically
for transient suppression. They feature large cross-sec-
tional area junctions for conducting high transient cur-
rents. They offer desirable characteristics for board level
protection including fast response time, low operating
and clamping voltage, and no device degradation.
The SMF series devices may be used to meet the immu-
nity requirements of IEC 61000-4-2, level 4. The small
SC70 package makes them ideal for use in portable elec-
tronics such as cell phones, PDAâs, notebook comput-
ers, and digital cameras.
SMF05C
TVS Diode Array
For ESD and Latch-Up Protection
PRELIMINARY
Features
 ESD protection for data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
 Small package for use in portable electronics
 Protects five I/O lines
 Working voltage: 5V
 Low leakage current
 Low operating and clamping voltages
 Solid-state silicon-avalanche technology
Mechanical Characteristics
 EIAJ SC70-6L package
 Molding compound flammability rating: UL 94V-0
 Marking : Marking Code
 Packaging : Tape and Reel per EIA 481
Applications
 Cellular Handsets and Accessories
 Cordless Phones
 Personal Digital Assistants (PDAâs)
 Notebooks and Handhelds
 Portable Instrumentation
 Digital Cameras
 Peripherals
 MP3 Players
Circuit Diagram
Schematic & PIN Configuration
1
3
4
5
6
2
Revision 08/04/04
1
1
6
2
5
3
4
SC70-6L (Top View)
www.semtech.com
|
▷ |