|
SC805A_08 Datasheet, PDF (1/17 Pages) Semtech Corporation – Miniature Integrated High Current Lithium-Ion Battery Charger | |||
|
SC805A
Miniature Integrated High Current
Lithium-Ion Battery Charger
PPOOWWEERRMMAANNAAGGEEMMEENNTT
DDeessccrriippttiioonn Style Name _GreenBarText FFeeaattuurreess
The SC805A is a fully integrated, single cell, constant-
current (CC)/constant-voltage (CV) Lithium-Ion battery
charger in a tiny 3x3 mm thermally enhanced lead-free
MLP package. The SC805A can operate as a stand-alone
charger or in conjunction with a Power Management Inte-
grated Circuit (PMIC).
The SC805A has a pre-charge function for trickle charging
deeply discharged batteries. The fast-charge current is
enabled automatically when the battery voltage reaches
the required threshold. When the battery reaches the
constant voltage or CV portion of the charge curve, the
SC805A switches to CV regulation mode. In this mode
the output current decays as the battery charges until the
termination current is reached and the SC805A signals the
charge cycle is complete. The SC805A can be conï¬gured
to continue charging for a pre-determined time before
turning off, or to turn off immediately upon termination.
After turning off its output, the SC805A enters monitor
mode. If the battery voltage drops by 100mV from the
CV voltage a new charge cycle will begin. The timer
function also protects against charging faulty batteries by
turning off if the pre-charge time exceeds ¼ of the total
programmed charge duration.
The SC805A also provides battery detection, and a battery
NTC thermistor interface to disable charging when the
battery temperature exceeds safe-to-charge limits.
The SC805A can also function as a general purpose current
source or as a current source for charging nickel-cadmium
(NiCd) and nickel-metal-hydride (NiMH) batteries.
Typical Application Circuit
 Fully integrated charger with FET pass transistor,
Reverse-blocking diode, sense resistor and thermal
protection
 High accuracy charge current*
 Tiny 3mm x 3mm 10-lead MLPD package
 Programmable pre-charge, fast-charge and
termination current
 Battery voltage controlled to 1% accuracy
 Built-in timer for protection and complete charging
 NTC interface with battery detection
 Soft-start to reduce adapter in-rush current
 Up to 1A continuous charge current
 Input voltage range from 3V to 6V allows seamless
charging from current limited adapter
ÂApPprloicviadetisoandsapter voltage VCCIL to power external
accessories
 Battery present detection and output indicator
 Operates in charger or LDO-Mode without battery
 0.1μA battery drain current in shutdown and monitor
modes
 Over-current protection in all charging modes
 CHRGB output communicates charging and
end-of-charge cycle
*US Patent 6,836,095
Applications
 Cellular Phones
 PDAs
 Handheld Meters
 Charging Stations
 USB Chargers
 Digital Cameras
 Programmable Current Source
CHARGER VIN
June 17, 2008
C1
1μF
Adapter
Present
Indicator
D1
LED
R1
3.01k
R2
3.01k
RT1
Thermistor
SC805A Typical Application Circuit
SC805A
1 VCC
VOUT 3
2 VCCIL CHRGB 10
7 EN/NTC ITERM 5
8 NOBAT IPRGM 4
9 RTIME
GND 6
R4
3.01k
R3
39.2k
R5
3.01k
Charge
Complete
Indicator
D2
LED
D3
LED
R6
R7
1k
1k
Charging
Indicator
1
BATTERY
C1
2.2μF
www.semtech.com
|
▷ |