|
SC2616 Datasheet, PDF (1/17 Pages) Semtech Corporation – Complete DDR Power Solution | |||
|
SC2616
Complete DDR Power Solution
POWER MANAGEMENT
Description
The SC2616 is a fully integrated DDR power solution pro-
viding power for the VDDQ and the VTT rails. The SC2616
also completely adheres to the ACPI sleep state power
requirements. A synchronous buck controller provides
the high current of the VDDQ at high efficiency, while a
linear sink/source regulator provides the termination
voltage with 2 Amp Source/Sink capability. This approach
makes the best trade-off between cost and perfor-
mance. Additional logic and UVLOs complete the func-
tionality of this single chip DDR power solution in compli-
ance with S3 and S5 motherboard signals.
The SC2616 is capable of sourcing up to 20A at the
switcher output, and 2A source/sink at the VTT output.
The MLP package provides excellent thermal impedance
while keeping small footprint. VDDQ current limit as well
as 3 independent thermal shutdown circuits assure safe
operation under all fault conditions.
Typical Application Circuit
Features
 High efficiency (90%) switcher for VDDQ supplies
20 Amps
 High current gate drives
 Single chip solution complies fully with ACPI power
sequencing specifications
 Internal S3 state LDO supplies high standby
VDDQ current (0.65Amp Min.)
 ACPI sleep state controlled
 2 Amp VTT source/sink capability
 UVLO on 5V and 12V
 Independent thermal shutdown for VDDQ and VTT
 Fast transient response
 18 pin MLP package
Applications
 Power solution for DDR memory per ACPI
motherboard specification
 High speed data line termination
 Memory cards
5V
12V
10uF 0.1uF
5V STBY
0.1uF
Suspend to RAM
Suspend to disk
0.1uF
C in
10k 10k
S3
S5
U4 SC2616
16 12VCC
5VCC 9
4 5VSBY
TG 15
11 SLP_S3
BG 14
10 SLP_S5
PGND 13
18 SS/EN
VDDQSTBY 7
17 COMP
VDDQIN 8
12 AGND
FB 1
3 LGND
VTT 6
2 VTTSNS
VTT 5
1uF
L
C out
0.1uF
VDDQ
VTT
0.1uF
Revision 3, March 2003
1
www.semtech.com
|
▷ |