|
SC192 Datasheet, PDF (1/15 Pages) Semtech Corporation – Synchronous Buck Converter with Integrated Power Devices | |||
|
SC192
Synchronous Buck Converter
with Integrated Power Devices
POWER MANAGEMENT
Description
The SC192 is a synchronous step-down converter with
integrated power devices designed for battery operated
systems. The internal power switches reduce system
size and cost. In addition, an efficiency of 95% can be
achieved for significant line and load ranges. The SC192
is designed for single-cell Li-Ion battery applications, but
also performs well in fixed 3.3V or 5V input circuits.
The SC192 has a flexible clocking scheme. It can be
synchronized to an external oscillator, fixed to the inter-
nal oscillator, or allowed to modulate the frequency dur-
ing light loads (PSAVE) for maximum battery life, by the
method called pulse frequency modulation (PFM). Shut-
down places the switches in a high impedance state and
turns off all control circuitry to achieve a typical quies-
cent current of 0.1μA.
Line and load regulation is to +/-0.5% of the output volt-
age. The internal MOSFET switches provide >1A peak
current to provide a DC output of at least 700mA.
Grounding the ILIM pin reduces the current limit by half.
Features
 2.7V to 7V Input Range
 Output Adjustable from 0.75V to Vin
 Fixed Frequency or PSAVE for Maximum
Efficiency Over Wide Load Current Range
 700mA Guaranteed Output Current
 No Schottky Diode Required
 35μA Quiescent Current
 100% Duty Cycle in Dropout
 95% Efficiency
 Fast Transient Response
 Over Temperature Protection
 Space-saving Micro Lead-Frame Package
MLPD-10 3x3
Applications
 Cell Phones
 Cordless Phones
 Notebook and Subnotebook Computers
 PDAs and Mobile Communicators
 1 Li-Ion or 3 NiMH/NiCd Powered Devices
The SC192 can achieve 100% duty cycle for excellent
low dropout performance and comes in a tiny MLPD-10,
3 x 3 package having a maximum height of 1mm.
Typical Application Circuit
Vin = 2.7V to 7V
C1
C3
SC192
L1
1
VIN
9
LX
8
EN
6
ILIM
ADJ 5
2
BP
3
GND
10
PGND
7
SYNC/PWM
C4
R8
4
COMP
Vout = 0.75V to Vin
C5
R1
C6
R2
Revision 8, March 26, 2007
1
www.semtech.com
|
▷ |