RCLAMP2504N Datasheet, PDF (1/11 Pages) Semtech Corporation – RailClamp® 2.5V & 3.3V TVS Arrays

RClamp2504N & RClamp3304N
RailClamp^
PROTECTION PRODUCTS - RailClamp^
2.5V & 3.3V TVS Arrays
Description
Features
A RailClamp^ is a low capacitance TVS array designed
to protect high speed data interfaces. This series has
been specifically designed to protect sensitive compo-
nents which are connected to data and transmission
lines from overvoltage caused by ESD (electrostatic
discharge), CDE (Cable Discharge Events), and Light-
ning.
The unique design incorporates surge rated, low
capacitance steering diodes and a TVS diode in a
single package. During transient conditions, the
steering diodes direct the transient current to ground.
The internal TVS diode clamps the transient voltage to
‹ Transient protection for high-speed data lines to
IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
IEC 61000-4-5 (Lightning) 25A (8/20µs)
‹ Array of surge rated diodes with internal TVS Diode
‹ Small package saves board space
‹ Protects up to four I/O lines
‹ Low capacitance (<5pF) for high-speed interfaces
‹ Low leakage current and clamping voltage
‹ Low operating voltage: 2.5V and 3.3V
‹ Solid-state silicon-avalanche technology
a safe level. The low capacitance array configuration
allows the user to protect up to four high-speed data
lines.
The RClamp^TM3304N and RClamp^TM2504N are con-
structed using Semtech’s proprietary EPD process
technology. The EPD process provides low stand-off
voltages with significant reductions in leakage current
and capacitance over silicon-avalanche diode pro-
cesses. They feature a true operating voltage of 2.5
volts and 3.3 volts for superior protection.
These devices are in a 10-pin, RoHS/WEEE compliant,
SLP2626P10 package. It measures 2.6 x 2.6 x
0.60mm. The leads are spaced at a pitch of 0.5mm
and are finished with lead-free NiPdAu. The high surge
capability (Ipp=25A, tp=8/20µs) means it can be used
in high threat environments in applications such as
Gigabit Ethernet, telecommunication lines, and digital
video.
Mechanical Characteristics
‹ SLP2626P10 10L package
‹ RoHS/WEEE Compliant
‹ Nominal Dimensions: 2.6 x 2.6 x 0.60 mm
‹ Lead Finish: NiPdAu
‹ Molding compound flammability rating: UL 94V-0
‹ Marking : Marking Code + Date Code
‹ Packaging : Tape and Reel
Applications
‹ USB 2.0
‹ 10/100/1000 Ethernet
‹ Digital Visual Interface (DVI)
‹ T1/E1 Secondary Protection
‹ T3/E3 Secondary Protection
‹ Analog Video
Circuit Diagram
Package Configuration
Pin 5
Pin 1
Pin 9
Pin 3
Pin 7
2.60
1 2 ^CL
CL ^2.60
0.50 BSC
Gnd
0.60
Revision 01/15/2008
1
www.semtech.com