|
RCLAMP1624T Datasheet, PDF (1/10 Pages) Semtech Corporation – ESD Protection for uUSB Interfaces Protects USB DP, DM, and ID Pins to 5V | |||
|
RClamp1624T
RailClamp®
PROTECTION PRODUCTS - RailClamp®
ESD Protection for uUSB Interfaces
Description
RailClamp® is a low capacitance TVS array designed to
protect high speed data interfaces. This series has
been specifically designed to protect sensitive compo-
nents which are connected to data and transmission
lines from overvoltage caused by ESD (electrostatic
discharge), CDE (Cable Discharge Events), and EFT
(electrical fast transients).
The RClamp1624T is specifically designed to protect
portable devices that utilize a uUSB port. The unique
design of this device features low capacitance TVS
diodes for protection of the USB data (DP, DM) and
USB ID pins operating up to 5 volts. Loading capaci-
tance on these lines is <1pF for maximum signal
integrity. An integrated 12 volt TVS diode is used for
protection of the USB voltage bus. This ensures the
device will remain in a high-impedance state during
normal USB operation or when the battery is being
charged. Leakage current of the VBus protection is
<50nA when operating at 12 volts.
The RClamp1624T is in a 6-pin SLP1710P4T package.
It measures 1.7 x 1.0 x 0.40mm. The leads are
spaced at a pitch of 0.4mm and are finished with lead-
free NiPdAu. They may be used to meet the ESD
immunity requirements of IEC 61000-4-2.
Features
 Transient protection for high-speed data lines to
IEC 61000-4-2 (ESD) ±18kV (air), ±12kV (contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
 Array of surge rated diodes with internal TVS Diode
 Small package saves board space
 Protects USB DP, DM, and ID Pins to 5V
 Protects USB VBus operating up to 12V
 Low capacitance (<1pF) on DP, DM, and ID Pins
 No insertion loss to 2.0GHz
 Low leakage current
 Low clamping voltage
 Innovative flow-through design allows easy pcb
layout
 Solid-state silicon-avalanche technology
Mechanical Characteristics
 SLP1710P4T 6L package
ÂPb-Free, Halogen Free, RoHS/WEEE Compliant
 Nominal Dimensions: 1.7 x 1.0 x 0.40 mm
 Lead Finish: NiPdAu
 Molding compound flammability rating: UL 94V-0
 Marking : Marking code + date code
 Packaging : Tape and Reel
Applications
 USB 2.0
 USB OTG
 Micro USB
Circuit Diagram
PIN Configuration
2
3
4
5, 6
1
5V
12V
Revision 3/9/2011
1
VBus
DM
DP
ID
GND
GND
SLP (Top View)
www.semtech.com
|
▷ |