|
RCLAMP0521P_10 Datasheet, PDF (1/7 Pages) Semtech Corporation – Ultra-Low Capacitance 1-Line ESD protection | |||
|
PROTECTION PRODUCTS - RailClamp®
Description
RailClamps are ultra low capacitance Transient Voltage
Suppressors (TVS) designed to protect high speed data
interfaces. This series has been specifically designed to
protect sensitive components which are connected to
high-speed data and transmission lines from overvoltage
caused by ESD (electrostatic discharge), CDE (Cable
Discharge Events), and EFT (electrical fast transients).
The RClamp®0521P has a maximum capacitance of
only 0.50pF. This allows it to be used on circuits operat-
ing in excess of 3GHz without signal attenuation. They
may be used to meet the ESD immunity requirements of
IEC 61000-4-2, Level 4 (±15kV air, ±8kV contact
discharge).
The RClamp0521P is in a 2-pin SLP1006P2 package
measuring 1.0 x 0.6 x 0.5mm. The leads are spaced
at a pitch of 0.65mm and feature a lead-free finish.
Each device will protect one high-speed line operating
at 5 volts. It gives the designer the flexibility to protect
single lines in applications where arrays are not practi-
cal. The combination of small size, low capacitance,
and high ESD surge capability makes them ideal for
use in applications such as cellular phones and digital
video interfaces.
RClamp0521P
Ultra-Low Capacitance
1-Line ESD protection
Features
 Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (tp = 5/50ns)
Cable Discharge Event (CDE)
 Ultra-small package (1.0 x 0.6 x 0.5mm)
 Protects one data or I/O line
 Low capacitance: 0.5pF
 Low clamping voltage
 Low operating voltage: 5.0V
 Solid-state silicon-avalanche technology
Mechanical Characteristics
 SLP1006P2 package
 Molding compound flammability rating: UL 94V-0
 Marking: Marking code
 Packaging: Tape and Reel
 Lead Finish: NiPdAu
 Pb-Free, Halogen Free, RoHS/WEEE Compliant
Applications
 Cellular Handsets & Accessories
 Digital Visual Interface (DVI)
 Display Port
 MDDI Ports
 USB Ports
 PCI Express
 Serial ATA
Dimensions
Schematic & PIN Configuration
1.0
0.60
0.65
0.50
Maximum Dimensions (mm)
Revision 01/12/2010
1
SLP1006P2 (Bottom View)
www.semtech.com
|
▷ |