|
RCLAMP0504S Datasheet, PDF (1/8 Pages) Semtech Corporation – RailClamp® Low Capacitance TVS Array | |||
|
PROTECTION PRODUCTS - RailClampï
Description
RailClampsï are surge rated diode arrays designed to
protect high speed data interfaces. This series has
been specifically designed to protect sensitive compo-
nents which are connected to data and transmission
lines from overvoltage caused by ESD (electrostatic
discharge), CDE (Cable Discharge Events), and EFT
(electrical fast transients).
The unique design incorporates surge rated, low
capacitance steering diodes and a TVS diode in a
single package. During transient conditions, the
steering diodes direct the transient to either the
positive side of the power supply line or to ground. The
internal TVS diode prevents over-voltage on the power
line, protecting any downstream components.
The low capacitance array configuration allows the user
to protect four high-speed data or transmission lines.
The low inductance construction minimizes voltage
overshoot during high current surges. This device is
optimized for ESD protection of portable electronics.
They may be used to meet the ESD immunity require-
ments of IEC 61000-4-2, Level 4 (±15kV air, ±8kV
contact discharge).
RClamp0504S
RailClampï
Low Capacitance TVS Array
Features
 Transient protection for high-speed data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
 Array of surge rated diodes with internal TVS Diode
 Small package saves board space
 Protects up to four I/O lines & power line
 Low capacitance (<3pF) for high-speed interfaces
 No insertion loss to 2.0GHz
 Low leakage current and clamping voltage
 Low operating voltage: 5.0V
 Solid-state silicon-avalanche technology
Mechanical Characteristics
 JEDEC SOT-23 6L package
 Nominal Dimensions: 2.9x2.8mm
 RoHS/WEEE Compliant
 Molding compound flammability rating: UL 94V-0
 Marking: Marking Code
 Packaging: Tape and Reel
Applications
 USB 2.0
 USB OTG
 Monitors and Flat Panel Displays
 Digital Visual Interface (DVI)
 Gigabit Ethernet
 IEEE 1394 Firewire Ports
Circuit Diagram
Schematic & PIN Configuration
5
1
3
4
6
2
Revision 01/17/2008
1
SOT-23 6L (Top View)
www.semtech.com
|
▷ |