GS1661 Datasheet, PDF (1/84 Pages) Semtech Corporation – HD/SD SDI Receiver, with Integrated Adaptive Cable Equalizer complete with SMPTE Video Processing

GS1661
HD/SD SDI Receiver, with Integrated Adaptive Cable Equalizer complete with
SMPTE Video Processing
Key Features
• Operation at 1.485Gb/s, 1.485/1.001Gb/s and 270Mb/s
• Supports SMPTE 292M, SMPTE 259M-C and DVB-ASI
• Integrated adaptive cable equalizer
• Typical equalized length of Belden 1694A cable:
Š 230m at 1.485Gb/s
Š 440m at 270Mb/s
• Integrated Reclocker with low phase noise, integrated
VCO
• Serial digital reclocked, or non-reclocked output
• Ancillary data extraction
• Parallel data bus selectable as either 20-bit or 10-bit
• Comprehensive error detection and correction
features
• Output H, V, F or CEA 861 Timing Signals
• 1.2V digital core power supply, 1.2V and 3.3V analog
power supplies, and selectable 1.8V or 3.3V I/O power
supply
• GSPI Host Interface
• -20ºC to +85ºC operating temperature range
• Low power operation (typically 460mW)
• Small 11mm x 11mm 100-ball BGA package
• Pb-free and ROHS compliant
Errata
Refer to Errata document entitled GS1660/GS1661 Errata
for this device (document number 53877).
Applications
HD-SDI
Link A
HD-SDI
Link B
Application: Dual Link (HD-SDI)
to Single Link (3G-SDI) Converter
HD-SDI
Deserializer
GS1661
10-bit
HV F/PCLK
FIFO
W
R
HD-SDI
Deserializer
10-bit
GS1661
HV F/PCLK
FIFO
W
R
10-bit
HV F/PCLK
10-bit
GS2962
3G-SDI
GS4910
HVF
X TAL
Description
The GS1661 is a multi-rate SDI integrated Receiver which
includes complete SMPTE processing, as per SMPTE 292M
and SMPTE 259M-C. The SMPTE processing features can be
bypassed to support signals with other coding schemes.
The GS1661 integrates Gennum's adaptive cable equalizer
technology, achieving unprecedented cable lengths and
jitter tolerance. It features DC restoration to compensate for
the DC content of SMPTE pathological signals.
The device features an Integrated Reclocker with an
internal VCO and a wide Input Jitter Tolerance (IJT) of
0.7UI.
A serial digital loop-through output is provided, which can
be configured to output either reclocked or non-reclocked
serial digital data. The serial digital output can be
connected to an external cable driver.
The device operates in one of four basic modes: SMPTE
mode, DVB-ASI mode, Data-Through mode or Standby
mode.
In SMPTE mode (the default operating mode), the GS1661
performs full SMPTE processing, and features a number of
data integrity checks and measurement capabilities.
The device also supports ancillary data extraction, and can
provide entire ancillary data packets through
host-accessible registers. It also provides a variety of other
GS1661 HD/SD SDI Receiver
Data Sheet
53751 - 3
September 2012
www.semtech.com
1 of 84