|
ECLAMP2422N Datasheet, PDF (1/9 Pages) Semtech Corporation – ESD/EMI Protection for Audio Interfaces | |||
|
PROTECTION PRODUCTS - EMIClampTM
Description
The EClampTM2422N is a (C-L-C) low pass filter array with
integrated TVS diodes. It is designed to suppress
unwanted EMI/RFI signals and provide electrostatic
discharge (ESD) protection in portable electronic
equipment. This state-of-the-art device utilizes solid-
state silicon-avalanche technology for superior clamp-
ing performance and DC electrical characteristics. It
has been optimized for protection of headset
audio ports in cellular phones and other portable
electronics.
EClamp2422N
ESD/EMI Protection
for Audio Interfaces
PRELIMINARY
Features
 Bidirectional EMI/RFI filter with integrated TVS
for ESD protection
 ESD protection to IEC 61000-4-2 (ESD) Level 4,
±15kV (air), ±8kV (contact)
 TVS working voltage: 5V
 Inductor: 2nH (Typical)
 Capacitors: 100pF (Typical at VR = 0V)
 Protection and filtering for two lines
 Solid-state technology
The device consists of two identical circuits comprised of
TVS diodes for ESD protection, and a C-L-C pi-filter for
EMI/RFI filtering. A typical inductor value of 2nH and a
capacitor value of 100pF are used to achieve 20dB
minimum attenuation from 800MHz to 2.7GHz. It has a
very low series resistance of 2 Ohms, making it ideal for
use on headset speaker interfaces. The TVS diodes
provide effective suppression of ESD voltages in excess of
±15kV (air discharge) and ±8kV (contact discharge) per
IEC 61000-4-2, level 4.
The EClamp2422N is in a 6-pin, RoHS/WEEE compliant,
SLP1510N6 package. It measures 1.45 x 1.0 x
0.58mm. The leads are spaced at a pitch of 0.5mm
and are finished with lead-free NiPdAu. The small
package makes it ideal for use in portable electronics.
Mechanical Characteristics
 SLP1510N6 6-pin package
 RoHS/WEEE Compliant
 Nominal Dimensions: 1.45 x 1.0 x 0.58 mm
 Lead Pitch: 0.5mm
 Lead finish: NiPdAu
 Marking: Marking Code
 Packaging: Tape and Reel per EIA 481
Applications
 Cellular Handsets
 Speaker Ports in Portables
 Notebook Computers
Circuit Diagram (Each Line)
Package Configuration
L1
IN
OUT
C
C
GND
1 1.45
0.50
1.00
0.58
Device Schematic (2X)
Revision 04/25/2007
SLP1510N6 package (Bottom Side View)
Nominal Dimensions in mm
1
www.semtech.com
|
▷ |