ECLAMP2374P Datasheet, PDF (1/8 Pages) Semtech Corporation – ESD/EMI Protection for Color LCD Interfaces

PROTECTION PRODUCTS - EMIClamp^TM
Description
The EClamp^TM2374P is a low pass filter array with
integrated TVS diodes. It is designed to suppress
unwanted EMI/RFI signals and provide electrostatic
discharge (ESD) protection in portable electronic
equipment. This state-of-the-art device utilizes solid-
state silicon-avalanche technology for superior clamp-
ing performance and DC electrical characteristics.
They have been optimized for protection of color
LCD panels in cellular phones and other portable
electronics.
The device consists of four identical circuits comprised
of TVS diodes for ESD protection, and a resistor -
capacitor network for EMI/RFI filtering. A series
resistor value of 100Ω and a capacitance value of 10pF
are used to achieve 30dB minimum attenuation from
1.8GHz to 2.5GHz. The TVS diodes provide effective
suppression of ESD voltages in excess of ±15kV (air
discharge) and ±8kV (contact discharge) per IEC 61000-
4-2, level 4.
The EClamp2374P is in a 8-pin, RoHS compliant,
SLP2116P8 package. It measures 2.1 x 1.6 x
0.58mm. The leads are spaced at a pitch of 0.5mm
and are finished with lead-free NiPd. The small pack-
age makes it ideal for use in portable electronics such
as cell phones, digital still cameras, and PDAs.
EClamp2374P
ESD/EMI Protection
for Color LCD Interfaces
Features
PRELIMINARY
‹ Bidirectional EMI/RFI filter with integrated TVS
for ESD protection
‹ ESD protection to IEC 61000-4-2 (ESD) Level 4,
±15kV (air), ±8kV (contact)
‹ Filter performance: 30dB minimum attenuation
1.8GHz to 2.5GHz
‹ TVS working voltage: 5V
‹ Resistor: 100Ω +/− 15%
‹ Typical Capacitance: 20pF (VR = 0V)
‹ Protection and filtering for four lines
‹ Solid-state technology
Mechanical Characteristics
‹ SLP2116P8 8-pin package
‹ RoHS/WEEE Compliant
‹ Nominal Dimensions: 2.1 x 1.6 x 0.58 mm
‹ Lead Pitch: 0.5mm
‹ Lead finish: NiPd
‹ Marking : Marking Code
‹ Packaging : Tape and Reel per EIA 481
Applications
‹ Color LCD Protection
‹ Cell Phone CCD Camera Lines
‹ Clamshell Cell Phones
Circuit Diagram (Each Line)
Package Configuration
100 Ω
IN
OUT
10pF 10pF
GND
2.10
12
1.60
0.50 BSC
0.58
Device Schematic (4X)
Revision 12/6/2005
8 Pin SLP package (Bottom Side View)
Nominal Dimensions in mm
1
www.semtech.com