E2801 Datasheet, PDF (1/2 Pages) Semtech Corporation – GR-253-Core SMC (SONET minimum clock) and ITU G.813 Option 2 Minature Surface Mount TCXO

E2801/E2801LF GR-253-Core SMC (SONET minimum clock) and
ITU G.813 Option 2 Minature Surface Mount TCXO
ISSUE 2 ; 13 JUNE 2005
Nominal Frequency, Fo
s 20.0MHz
Supply Voltage
s 3.3V ±5%
Input Current
s < 6mA
Output
s Type : HCMOS
s Load : 15pF max
s Vol : < 0.1 Vs
s Voh : > 0.9 Vs
s Duty Cycle @ 50%: 45% to 55%
s Rise Time, 10% to 90%: <8ns
s Fall Time, 90% to 10%:<8ns
Holdover Stability < ±4.6ppm
Incl.
s Temperature, -40 to 85°C:
s Supply Voltage, 3.3V ± 5%
s Ageing 24 hours: < ±0.5ppm, equivalent
to <±5.8x10^-12/sec
Free-Run Accuracy < ±20.0ppm ref.Fo
Incl.
s Calibration @ 25°C,
s Temperature -40 to 85°C
s Supply Voltage 3.3V ±5%,
s Load 15pF ±10%
s Reflow Soldering and Ageing 20 years
Phase Noise
s 10Hz < -85dBc/Hz
s 100Hz <-110dBc/Hz
s 1kHz <-125dBc/Hz
s >10kHz <-135dBc/Hz
Marking (laser)
s Manufacturers ID (CMAC)
s Manufacturers identifier (xx)
s Pad 1 / Static Sensitivity Identifier (∆)
s Abbreviated Part Number (2801)
s Oscillator’s Date of Manufacture (YW)
CMAC xx
∆2801 YW
Note: Production parts will be
marked in this format.
Sample marking may vary.
Environmental Specification
s Storage Temperature Range: -55 to 125°C
s Vibration: IEC 60068-2-6 Test Fc Procedure B4, 10-60Hz
1.5mm displacement, at 98.1 m/s2, 30 minutes in each
of three mutually perpendicular axes at 1 octave per
minute.
s Shock: IEC 60068-2-27 Test Ea, 980m/s2 acceleration for
6ms duration, 3 shocks in each direction along three
mutually perpendicular axes.
s Solderability: MIL-STD-202, Method 208, Catergory 3.
Resistance to Soldering heat: 260°C / 10 seconds exposure
s RoHS/Soldering: Parts with the suffix ‘LF’ on the part
number are fully compliant with the European Union
directive 2002/95/EC on the restriction of the use of certain
hazardous substances in electrical and electronic
equipment.
Note: The RoHS compiant parts are suitable for
assembly using both Lead-free solders (see Lead-free
Reflow soldering profile) and Tin/Lead solders (see Tin/Lead
Reflow soldering profile).
Tri-state
s Pad 8 open circuit or >0.6Vs : Output Enabled
s Pad 8 < 0.2Vs : Output in tri-state mode
s When in tri-state, the output stage is disabled but the
oscillator
and compensation circuit are still active,
(Current consumption < 1mA)