IP140ME Datasheet, PDF (6/8 Pages) Seme LAB – POSITIVE FIXED VOLTAGE REGULATOR

POSITIVE FIXED
VOLTAGE REGULATOR
IP140ME/MAE, IP78M00/ALCC4 SERIES
ELECTRICAL CHARACTERISTICS(1) (TC = 25°C unless otherwise stated)
IP78M15LCC4, IP140ME-15
Symbols Parameters
Test Conditions
Min.
VO
∆VO
∆VO
IQ
∆I_Q
VN
∆ V_IN
∆V_O
VD
ISC
IPK
Output Voltage
Line Regulation ⁽²⁾
Load Regulation ⁽²⁾
Quiescent Current
Quiescent Current Change
Output Noise Voltage ⁽³⁾
Ripple Rejection
Drop Out Voltage
Short-Circuit Current
Short-Circuit Current
Average TC of Vo ⁽³⁾
IOUT = 100mA
VIN = 23V
14.4
P ≤ PMAX, 5mA ≤ IO ≤ 350mA,
VIN = 18V to 30V
● 14.25
IO = 200mA
17.5V ≤ VIN ≤ 30V
20V ≤ VIN ≤ 30V _●
IO = 500mA
20V ≤ VIN ≤ 26V
VIN = 23V
5mA ≤ IO ≤ 500mA _●
VIN = 23V
IO = 350mA
●
VIN = 23V
5mA ≤ IO ≤ 500mA _●
18V ≤ VIN ≤ 30V
IO = 200mA
●
VIN = 23V
10Hz ≤ f ≤ 100KHz
f = 120Hz
IO = 300mA
54
18.5V ≤ VIN≤ 28.5V
IO = 100mA
● 54
IO = 350mA
VIN = 35V
VIN = 23V
0.7
IO = 5mA
Typ
15
4
90
300
1.0
1.5
Max.
15.6
15.75
60
30
150
150
6
0.5
0.8
600
2.5
600
1.6
Units
V
mV
mA
µV
dB
V
mA
A
mV/°C
Notes
The ● denotes the specifications which apply over the full operating temperature range.
(1) All characteristics are measured with a capacitor across the input of 0.22µF and a capacitor across the output of 0.1µF. Although power
dissipation is internally limited, theses specifications are applicable to maximum power dissipation PMAX = 2W, IMAX = 0.5A, TJ = 25°C
(2) Regulation is measured at constant junction temperature, using pulse testing at a low duty cycle. Changes in output voltage due to heating
effects must be taken into account separately.
(3) By design, not a production test.
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone [phone] Fax [phone] Email: [e-mail]
Document Number 2832
Website: http://www.semelab-tt.com
Issue 2
Page 6 of 8