English
Language : 

LT1086220M05 Datasheet, PDF (2/3 Pages) Seme LAB – LOW DROPOUT 1.5 AMP POSITIVE VOLTAGE REGULATOR
SEME
LAB
LT1086–220M–05
LT1086–05–220M
LT1086–12–220M
MILITARY VERSION
DESCRIPTION
The LT1086 is designed to provide 1.5A with higher efficiency than currently available devices. All internal circuitry is
designed to operate down to 1V input to output differential and the dropout voltage is fully specified as a function of load
current. Dropout is guaranteed at a maximum of 1.5V at maximum output current, decreasing at lower load currents.
On-chip trimming adjusts the reference output voltage to 1%. Current limit is also trimmed, minimising the stress on both
the regulator and power source circuitry under overload conditions.
The LT1086 is pin compatible with older 3 terminal adjustable regulators. A 10mF output capacitor is required on these
new devices; however, this is usually included in most regulator designs.
Unlike PNP regulators, where up to 10% of the output current is wasted as quiescent current, the LT1086 quiescent
current flows into the load, increasing efficiency.
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise stated)
Parameter
Output
Voltage Test Conditions
VO
Output Voltage
5
VIN = 6.5 to 20V
TJ = –55 to 150°C
12
VIN = 13.5V to 25V
TJ = –55 to 150°C
IO = 0 to 1.5A
IO = 0 to 1.5A
VREF
Reference Voltage
ADJ.
VIN – VOUT = 1.5 to 15V IO = 10mA to 1.5A
TJ = –55 to 150°C
5
VIN = 6.5 to 20V
IO = 0
TJ = –55 to 150°C
REG(LINE) Line Regulation
12
VIN = 13.5 to 25V
IO = 0
TJ = –55 to 150°C
ADJ.
VIN – VOUT = 1.5 to 15V
ILOAD = 10mA
TJ = –55 to 150°C
5
VIN = 8V
IO = 0 to 1.5A
TJ = –55 to 150°C
REG(LOAD) Load Regulation
12
VIN = 15V
IO = 0 to 1.5A
TJ = –55 to 150°C
See notes 1,2
VD
Dropout Voltage
See note 3
ADJ.
5
12
ADJ.
VIN – VOUT = 3V
IO = 10mA to 1.5A
DVOUT = 50mV
IOUT = 1.5A
DVOUT = 120mV
IOUT = 1.5A
DVREF = 1%
IOUT = 1.5A
TJ = –55 to 150°C
TJ = –55 to 150°C
TJ = –55 to 150°C
TJ = –55 to 150°C
Min. Typ. Max. Unit
4.90 5 5.10
11.76 12 12.24 V
1.225 1.25 1.270
0.5 10
1
10
mV
1
25
2
25
0.015 0.2
%
0.035 0.2
5
20
10
35
mV
12
36
24
72
0.1 0.3
%
0.2 0.4
1.3 1.5
1.3 1.5 V
1.3 1.5
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
Prelim. 5/95