|
SMP600G-FL Datasheet, PDF (1/2 Pages) Seme LAB – P.I.N. PHOTODIODE | |||
|
SMP600G-FL
MECHANICAL DATA
Dimensions in mm.
P.I.N. PHOTODIODE
WINDOW
à 5.9 ± 0.1
à 9.1 ± 0.2
à 8.1 ± 0.1
SENSITIVE
SURFACE
à 0.45
LEAD
5.08 ± 0.2
3
2
1
TO-39 Package
Pin 1 â Anode Pin 2 âCathode
Pin 3 â Case
FEATURES
⢠HIGH SENSITIVITY
⢠EYE RESPONSE DETECTION
⢠PHOTODIODE ISOLATED FROM PACKAGE
⢠EXCELLENT LINEARITY
⢠LOW NOISE
⢠WIDE SPECTRAL RESPONSE
⢠BG18 INTEGRAL OPTICAL FILTER
⢠TO39 HERMETIC METAL CAN PACKAGE
⢠EMI SCREENING MESH AVAILABLE
DESCRIPTION
The SMP600G-FL is a Silicon P.I.N. photodiode
incorporated in a hermetic metal can package. The
electrical terminations are via two leads of diameter 0.018"
on a pitch centre diameter of 0.2". The can structure
incorporates an photoptic response optical filter with peak
transmission at 510nm. The photodiode is electrically
isolated from the package, which has a separate earth
lead.
The larger photodiode active area provides greater
sensitivity than the SMP550 range of devices, with a slight
reduction in speed. Inherent in the device geometry is a
reduction in the receiving angle. The photodiode structure
has been optimised for high sensitivity, asymmetric light
measurement applications. The metal can, isolated
photodiode and optional screening mesh ensure a rugged
device with a high degree of immunity to conducted and
radiated electrical interference.
ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)
Operating temperature range
Storage temperature range
Temperature coefficient of responsively
Temperature coefficient of dark current
Reverse breakdown voltage
-40°C to +70°C
-45°C to +80°C
0.35% per °C
x2 per 8°C rise
60V
Semelab plc. Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612.
Prelim. 1/98
|
▷ |