|
SMP600G-FJ Datasheet, PDF (1/2 Pages) Seme LAB – P.I.N. PHOTODIODE | |||
|
SMP600G-FJ
MECHANICAL DATA
Dimensions in mm.
P.I.N. PHOTODIODE
WINDOW
à 5.9 ± 0.1
à 9.1 ± 0.2
à 8.1 ± 0.1
SENSITIVE
SURFACE
à 0.45
LEAD
5.08 ± 0.2
FEATURES
⢠HIGH SENSITIVITY
⢠PHOTODIODE ISOLATED FROM PACKAGE
⢠EXCELLENT LINEARITY
⢠LOW NOISE
⢠· WIDE SPECTRAL RESPONSE
⢠INTEGRAL OPTICAL FILTER OPTION note 1
⢠TO39 HERMETIC METAL CAN PACKAGE
⢠EMI SCREENING MESH AVAILABLE
Note 1 Contact Semelab Plc for filter options
3
2
1
TO-39 Package
Pin 1 â Anode Pin 2 â Cathode Pin 3 â Case
DESCRIPTION
The SMP600G-FJ is a Silicon P.I.N. photodiode
incorporated in a hermetic metal can package. The
electrical terminations are via two leads of diameter 0.018"
on a pitch centre diameter of 0.2". The can structure
permits a wide range of optical filter options. The
photodiode is electrically isolated from the package, which
has a separate earth lead.
The larger photodiode active area provides greater
sensitivity than the SMP550 range of devices, with a slight
reduction in speed. Inherent in the device geometry is a
reduction in the receiving angle. The photodiode structure
has been optimised for high sensitivity, light measurement
applications. The metal can, isolated photodiode and
optional screening mesh ensure a rugged device with a
high degree of immunity to conducted and radiated
electrical interference.
ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)
Operating temperature range
Storage temperature range
Temperature coefficient of responsively
Temperature coefficient of dark current
Reverse breakdown voltage
-40°C to +70°C
-45°C to +80°C
0.35% per °C
x2 per 8°C rise
60V
Semelab plc. Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612.
Prelim. 1/98
|
▷ |