SMP600G-EL Datasheet, PDF (1/2 Pages) Seme LAB – P.I.N. PHOTODIODE

SMP600G-EL
MECHANICAL DATA
Dimensions in mm.
WINDOW
Ø 5.9 ± 0.1
Ø 9.1 ± 0.2
Ø 8.1 ± 0.1
SE NSITIVE
SURF ACE
P.I.N. PHOTODIODE
FEATURES
• HIGH SENSITIVITY
• EYE RESPONSE DETECTION
• EXCELLENT LINEARITY
• LOW NOISE
• WIDE SPECTRAL RESPONSE
• BG18 INTEGRAL OPTICAL FILTER
• TO39 HERMETIC METAL CAN PACKAGE
• EMI SCREENING MESH AVAILABLE
Ø 0.45
LEAD
5.08 ± 0.2
2
1
TO-39 Package
Pin 1 – Anode
Pin 2 –Cathode & Case
DESCRIPTION
The SMP600G-EL is a Silicon P.I.N. photodiode
incorporated in a hermetic metal can package. The
electrical terminations are via two leads of diameter 0.018"
on a pitch centre diameter of 0.2". The can structure
incorporates an photoptic response optical filter with peak
transmission at 510nm. The cathode of the photodiode is
electrically connected to the package.
The larger photodiode active area provides greater
sensitivity than the SMP550 range of devices, with a slight
reduction in speed. Inherent in the device geometry is a
reduction in the receiving angle. The photodiode structure
has been optimised for high sensitivity, asymmetric light
measurement applications. The metal can, isolated
photodiode and optional screening mesh ensure a rugged
device with a high degree of immunity to conducted and
radiated electrical interference.
ABSOLUTE MAXIMUM R ATINGS(Tcase = 25°C unless otherwise stated)
Operating temperature range
Storage temperature range
Temperature coefficient of responsively
Temperature coefficient of dark current
Reverse breakdown voltage
-40°C to +70°C
-45°C to +80°C
0.35% per °C
x2 per 8°Crise
60V
Semelab plc . Telephone [phone]. Telex: 341927. Fax [phone].
Prelim. 1/98