SMP600G-EK Datasheet, PDF (1/2 Pages) Seme LAB – P.I.N. PHOTODIODE

SMP600G-EK
MECHANICAL DATA
Dimensions in mm.
P.I.N. PHOTODIODE
WINDOW
Ø 5.9 ± 0.1
Ø 9.1 ± 0.2
Ø 8.1 ± 0.1
SENSITIVE
SURFACE
FEATURES
• EXCELLENT LINEARITY
• LOW NOISE
• WIDEST SPECTRAL RESPONSE
• ENHANCED UV SENSITIVITY
• INTEGRAL OPTICAL FILTER OPTION note 1
• TO39 HERMETIC METAL CAN PACKAGE
• EMI SCREENING MESH AVAILABLE
Ø 0.45
LEAD
5.08 ± 0.2
2
1
TO-39 Package
Pin 1 – Anode
Pin 2 – Cathode & Case
Note 1 Contact Semelab Plc for filter options
DESCRIPTION
The SMP600G-EK is a Silicon P.I.N. photodiode
incorporated in a hermetic metal can package. The
package window has greater ultra-violet light transmission,
thus extending the useful spectral range of the device. The
electrical terminations are via two leads of diameter 0.018"
on pitch of 0.2". The cathode of the photodiode is
electrically connected to the package.
The larger photodiode active area provides greater
sensitivity than the SMP550 range of devices, with a slight
reduction in speed. Inherent in the device geometry is a
reduction in the receiving angle. The photodiode structure
has been optimised for high sensitivity, light measurement
applications across the infra-red to ultra-violet spectrum.
Inclusion of a suitable optical filter into the package can
produce a device that responds only to ultra-violet light.
The metal can and optional screening mesh ensure a
rugged device with a high degree of immunity to radiated
electrical interference.
ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)
Operating temperature range
Storage temperature range
Temperature coefficient of responsively
Temperature coefficient of dark current
Reverse breakdown voltage
-40°C to +70°C
-45°C to +80°C
0.35% per °C
x2 per 8°C rise
60V
Semelab plc. Telephone [phone]. Telex: 341927. Fax [phone].
Prelim. 1/98