SMP550G-FJ Datasheet, PDF (1/2 Pages) Seme LAB – P.I.N. PHOTODIODE

SMP550G-FJ
MECHANICAL DATA
Dimensions in mm.
P.I.N. PHOTODIODE
WINDOW
Ø 5.9 ± 0.1
Ø 9.1 ± 0.2
Ø 8.1 ± 0.1
SENSITIVE
SURFACE
Ø 0.45
LEAD
5.08 ± 0.2
3
2
1
TO-39 Package
Pin 1 – Anode Pin 2 – Cathode Pin 3 – Case
FEATURES
• PHOTODIODE ISOLATED FROM PACKAGE
• EXCELLENT LINEARITY
• LOW NOISE
• WIDE SPECTRAL RESPONSE
• LOW LEAKAGE CURRENT
• LOW CAPACITANCE
• INTEGRAL OPTICAL FILTER OPTION note 1
• TO39 HERMETIC METAL CAN PACKAGE
• EMI SCREENING MESH AVAILABLE
Note 1 Contact Semelab Plc for filter options
DESCRIPTION
The SMP550G-FJ is a Silicon P.I.N. photodiode
incorporated in a hermetic metal can package. The
electrical terminations are via two leads of diameter 0.018"
on a pitch centre diameter of 0.2". The can structure
permits a wide range of optical filter options. The
photodiode is electrically isolated from the package, which
has a separate earth lead.
The larger photodiode active area provides greater
sensitivity than the SMP400 range of devices, with a
corresponding reduction in speed. The photodiode
structure has been optimised for high sensitivity, light
measurement applications. The metal can, isolated
photodiode and optional screening mesh ensure a rugged
device with a high degree of immunity to conducted and
radiated electrical interference.
ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)
Operating temperature range
Storage temperature range
Temperature coefficient of responsively
Temperature coefficient of dark current
Reverse breakdown voltage
-40°C to +70°C
-45°C to +80°C
0.35% per °C
x2 per 8°C rise
60V
Semelab plc. Telephone [phone]. Telex: 341927. Fax [phone].
Prelim. 1/98