|
SMP550G-EM Datasheet, PDF (1/2 Pages) Seme LAB – P.I.N. PHOTODIODE | |||
|
SMP550G-EM
MECHANICAL DATA
Dimensions in mm.
P.I.N. PHOTODIODE
WINDOW
à 5.9 ± 0.1
à 9.1 ± 0.2
à 8.1 ± 0.1
SE NSITIVE
SURF ACE
à 0.45
LEAD
5.08 ± 0.2
FEATURES
⢠VISIBLE AND UV BLIND
⢠EXCELLENT LINEARITY
⢠LOW NOISE
⢠WIDE SPECTRAL RESPONSE
⢠LOW LEAKAGE CURRENT
⢠LOW CAPACITANCE
⢠RG850 INTEGRAL OPTICAL FILTER
⢠TO39 HERMETIC METAL CAN PACKAGE
⢠EMI SCREENING MESH AVAILABLE
2
1
TO-39 Package
Pin 1 â Anode
Pin 2 â Cathode & Case
DESCRIPTION
The SMP550G-EM is a Silicon P.I.N. photodiode
incorporated in a hermetic metal can package. The
electrical terminations are via two leads of diameter 0.018"
on a pitch of 0.2". The can structure incorporates an optical
filter that only transmits infra-red light. The cathode of the
photodiode is electrically connected to the package.
The larger photodiode active area provides greater
sensitivity than the SMP400 range of devices, with a
corresponding reduction in speed. The photodiode
structure has been optimised for high sensitivity, light
measurement applications. The metal can and optional
screening mesh ensure a rugged device with a high
degree of immunity to radiated electrical interference.
ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)
Operating temperature range
Storage temperature range
Temperature coefficient of responsively
Temperature coefficient of dark current
Reverse breakdown voltage
-40°C to +70°C
-45°C to +80°C
0.35% per °C
x2 per 8°C rise
60V
Semelab plc. Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612.
Prelim. 1/98
|
▷ |