SMP400G-X3 Datasheet, PDF (1/2 Pages) Seme LAB – P.I.N. PHOTODIODE

MECHANICAL DATA
Dimensions in inches.
0.175
0.205
SMP400G-X3
P.I.N. PHOTODIODE
0.015
0.018
0.095
0.105
Active
Area
TO-92 Package
FEATURES
• RED PLASTIC ENCAPSULATED PACKAGE
• 0.1” (2.54mm) LEAD SPACING
• BUILT IN FILTER
• LOW DARK CURRENT
DESCRIPTION
The SMP400G-X3 is a silicon PIN photodiode which is
incorporated in a red plastic package which simultaneously
serves as a filter and is also transparent for the red to
infra-red emission.The terminals are solder tabs with 0.1”
(2.54mm) spacing. Due to its design the diode can be
assembled vertically on PC board.
Arrays can be realised by multiple arrangements.This
versatile photo detector can be used as a diode as well as
a voltage cell.
The signal / noise ratio is particularly favourable , even at
low illuminances.
The PIN photodiode is outstanding for low junction
capacitance , high cut off frequency and short switching
time. It is particularly suitable for IR sound transmission
and remote control.
ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)
Operating temperature range
Storage temperature range
Temperature coefficient of responsively
Temperature coefficient of dark current
Reverse Breakdown Voltage
-40°C to +70°C
-45°C to +80°C
0.35% per °C
x2 per 8°C rise
60V
Semelab plc. Telephone [phone]. Telex: 341927. Fax [phone].
Prelim. 1/98