SMP1000G-KP Datasheet, PDF (1/2 Pages) Seme LAB – P.I.N. PHOTODIODE

SMP1000G-KP
MECHANICAL DATA
Dimensions in mm.
P.I.N. PHOTODIODE
Ø 15.25
Ø 14.0
Ø 0.45
LEAD
10.16
FEATURES
• HIGH SENSITIVITY
• PHOTODIODE ISOLATED FROM PACKAGE
• EXCELLENT LINEARITY
• LOW NOISE
• WIDE SPECTRAL RESPONSE
• INTEGRAL OPTICAL FILTER OPTION note 1
• TO8 HERMETIC METAL CAN PACKAGE
• EMI SCREENING MESH AVAILABLE
Note 1 Contact Semelab Plc for filter options
3
1
2
Pin 1 – Anode
TO-8
Pin 2 – Cathode
Pin 3 – Case
DESCRIPTION
The SMP1000G-KP is a large Silicon P.I.N. photodiode
incorporated in a hermetic metal can package. The
electrical terminations are via two leads of diameter 0.018"
on a pitch centre diameter of 0.2". The photodiode is
electrically isolated from the package, which has a
separate earth lead.
The larger photodiode active area provides greater
sensitivity than the SMP900 range of devices, with a
corresponding reduction in speed. The photodiode
structure has been optimised for high sensitivity, light
measurement applications. The metal can, isolated
photodiode and optional screening mesh ensure a rugged
device with a high degree of immunity to conducted and
radiated electrical interference.
ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)
Operating temperature range
Storage temperature range
Temperature coefficient of responsively
Temperature coefficient of dark current
Reverse breakdown voltage
-40°C to +70°C
-45°C to +80°C
0.35% per °C
x2 per 8°C rise
60V
Semelab plc. Telephone [phone]. Telex: 341927. Fax [phone].
Prelim. 1/98