IP140A_07 Datasheet, PDF (1/5 Pages) Seme LAB – 1 AMP POSITIVE VOLTAGE REGULATOR

IP140A SERIES
IP140 SERIES
IP7800A SERIES
IP7800 SERIES
LM140 SERIES
1 AMP POSITIVE
12
1
2
VOLTAGE REGULATOR
3
3
Pin 1 – V_IN
Pin 2 – V_OUT
Case – Ground
K Package – TO–3
1 23
Pin 1 – V_IN
Pin 2 – Ground
Pin 3 – V_OUT
Case – Ground*
G Package – TO–257
IG Package– TO–257*
* isolated Case on IG package
12 13 14 15 16
11
17
10
18
9
1
8
2
76543
LCC4
CERAMIC SURFACE
MOUNT
Pins 4,5 – V_IN .
Pins 6,7,8,9,10,11,12,13 – V_OUT
Pins 15,16,17,18,1,2 – _Ground
Pin 1 – V_IN
Pin 2 – V_OUT
Case – Ground
R Package – TO–66
1
3
2
Pin 1 – V_IN
Pin 2 – Ground
Pin 3 – V_OUT
SMD 1 PACKAGE
Ceramic Surface Mount
7.54 (0.296)
0.76 (0.030)
min.
2.41 (0.095)
2.41 (0.095)
1
3
0.127 (0.005)
3.175 (0.125)
Max.
2
16 PLCS
0.50(0.020)
0.127 (0.005)
7.26 (0.286)
0.127 (0.005)
0.50 (0.020)
max.
Pin 1 – V_IN
Pin 2 – Ground
Pin 3 – V_OUT
SMD 05 PACKAGE
Ceramic Surface Mount
FEATURES
• OUTPUT CURRENT UP TO 1.0A
• OUTPUT VOLTAGES OF 5, 12, 15V
• 0.01% / V LINE REGULATION
• 0.3% / A LOAD REGULATION
• THERMAL OVERLOAD PROTECTION
• SHORT CIRCUIT PROTECTION
• OUTPUT TRANSISTOR SOA PROTECTION
• 1% VOLTAGE TOLERANCE (–A VERSIONS)
DESCRIPTION
The IP140A / LM140 / IP7800A / IP7800 series of
3 terminal regulators is available with several fixed output
voltage making them useful in a wide range of applications.
The A suffix devices are fully specified at 1A,
provide 0.01% / V line regulation, 0.3% / A load regulation
and ±1% output voltage tolerance at room temperature.
Protection features include Safe Operating Area current
limiting and thermal shutdown.
ABSOLUTE MAXIMUM RATINGS (T_case = 25°C unless otherwise stated)
V_I
DC Input Voltage (for V_O = 5, 12, 15V)
35V
P_D
Power Dissipation
Internally limited ¹
T_j
Operating Junction Temperature Range
–55 to 150°C
T_stg
Storage Temperature
–65 to 150°C
Note 1. Although power dissipation is internally limited, these specifications are applicable for maximum power dissipation P_MAX
of 20W. I_MAX = 1.0A.
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Semelab plc. Telephone [phone]. Fax [phone].
E-mail: [e-mail] Website: http://www.semelab.co.uk
Document Number 2833
Issue 2