IP117MAE Datasheet, PDF (1/2 Pages) Seme LAB – 0.5 AMP POSITIVE ADJUSTABLE VOLTAGE REGULATOR IN CERAMIC SURFACE MOUNT PACKAGE

IP117MAHVE IP117MAE
IP117MHVE IP117MEA
1.27 (0.050)
1.07 (0.040)
11
7.62 (0.300) ¹⁰
7.12 (0.280)
9
8
9.14 (0.360)
8.64 (0.340)
12 13 14 15 16
1.39 (0.055)
1.02 (0.040)
17
18
1
2
0.76 (0.030)
0.51 (0.020)
76543
1.39 (0.055)
1.15 (0.045)
1.65 (0.065)
1.40 (0.055)
0.33
0.08
(0.013)
(0.003)
Rad.
0.43 (0.017)
0.18 (0.007 ^Rad.
Pins 4,5
Pins 6,7,8,9,10,11,12,13
Pins 15,16,17,18,1,2
– Adjust
– V_IN
– V_OUT
≈ 2.16 (0.085)
0.5 AMP
POSITIVE ADJUSTABLE
VOLTAGE REGULATOR
IN CERAMIC SURFACE
MOUNT PACKAGE
FEATURES
• OUTPUT VOLTAGE RANGE ADJUSTABLE:
1.25 TO 40V FOR STANDARD VERSION
1.25 TO 60V FOR –HV VERSION
• 1% OUTPUT VOLTAGE TOLERANCE
(–A VERSIONS)
• 0.3% LOAD REGULATION
• 0.01% / V LINE REGULATION
• COMPLETE SERIES OF PROTECTIONS:
• CURRENT LIMITING
• THERMAL SHUTDOWN
• SOA CONTROL
DESCRIPTION
The IP117M Series are three terminal positive adjustable voltage regulators capable of supplying in excess of 0.5A over a
1.25V to 60V output range. These regulators are exceptionally easy to use and require only two external resistors to set the
output voltage. In addition to improved line and load regulation, a major feature of the “A” series is the initial output voltage
tolerance, which is guaranteed to be less than 1%.
Over full operating conditions, including load, line, and power dissipation, the reference voltage is guaranteed not to vary more
than 2%. These devices exhibit current limit, thermal overload protection, and improved power device safe operating area
protection, making them essentially indestructible.
ABSOLUTE MAXIMUM RATINGS (T_case = 25°C unless otherwise stated)
V_I–O
Input - Output Differential Voltage
– Standard
40V
– HV Series
60V
P_D
T_J
T_STG
Power Dissipation
Operating Junction Temperature Range
Storage Temperature
Internally limited
–55 to 150°C
–65 to 150°C
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Semelab plc. Telephone [phone]. Fax [phone].
E-mail: [e-mail] Website: http://www.semelab.co.uk
Document Number 5383
Issue 1