1N6627D3A Datasheet, PDF (1/4 Pages) Seme LAB – ULTRA FAST RECOVERY POWER RECTIFIER

ULTRA FAST RECOVERY
POWER RECTIFIER
1N6627D3A / 1N6627D3B
• DLCC3 - Light Weight Hermetic Ceramic Surface Mount
Package is designed as a drop In replacement for “D-5B” / “E-
MELF” package.
• High forward current surge current capability.
• Switching power supplies or other applications requiring
fast switching and low forward loss.
• Space Level and High-Reliability Screening Options Available.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise stated)
VRWM _{Working Peak Reverse Voltage}
400V
IO¹
Average Rectified Forward Current TA = 25°C
1.75A
IFSM² _{Peak Forward Current Surge}
75A
TJ
Junction Temperature Range
-65 to +150°C
Tstg
Storage Temperature Range
-65 to +175°C
TSP
Maximum Soldering Pad Temperature for 20s
260°C
THERMAL PROPERTIES
Symbols Parameters
R_{θJA(PCB) Thermal Resistance, Junction To Ambient, On PCB}
R_θJSP
Thermal Resistance, Junction To Solder Pads, TSP = 25°C
Max.
TBA
TBA
Units
°C/W
°C/W
Notes
1 _{Average current with a half-sine wave including reverse voltage amplitude equal to the magnitude of the full rated VRWM.}
2
Test Pulse =8.3ms, half-sine wave.
Semelab ltd reserves the right to change test conditions, parameter limits and package dimensions without notice.
Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However
Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to
verify that datasheets are current before placing an order.
Semelab ltd
Telephone [phone]
Email: [e-mail]
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Fax [phone]
Website: http://www.semelab-tt.com
Document Number 9028
Issue 2
Page 1 of 4