1N5809D3A Datasheet, PDF (1/4 Pages) Seme LAB – ULTRA FAST RECOVERY POWER RECTIFIER

ULTRA FAST RECOVERY
POWER RECTIFIER
1N5809D3A / 1N5809D3B
• DLCC3 - Light Weight Hermetic Ceramic Surface Mount
Package is designed as a drop In replacement for “D-5B” / “E-
MELF” package^†
• Ultra Fast Reverse Recovery
• Switching Power Supply Applications
• Space Level and High-Reliability Screening Options Available
ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise stated)
VBR
Breakdown Voltage
110V
VRWM _{Working Peak Reverse Voltage}
100V
IO
Maximum Rectified Current Io₁ = TA +55°C ⁽¹⁾
3.0A
Derate above TA 55°C
25mA/°C
IFSM
Surge Current, tp = 8.3ms ⁽²⁾
125A
TJ
Junction Temperature Range
-65 to +175°C
Tstg
Storage Temperature Range
-65 to +175°C
THERMAL PROPERTIES
Symbols
Parameters
R_θJSP(IN)
Thermal Resistance, Junction To Solder Pads TSP = 25°C
R_θJA(PCB)⁽³⁾
Thermal Resistance, Junction To Ambient, On PCB
R_θJA(PCB)⁽⁴⁾
Thermal Resistance, Junction To Ambient, On PCB
Max.
17
50
117
Units
°C/W
°C/W
°C/W
Notes
(1) IO1 is rated at 3.0A @ TA = 55°C for PC boards where thermal resistance from mounting point to ambient is sufficiently controlled where
TJ(Max) does not exceed 175°C; This equates to R_θJA(PCB) ≤ 52°C/W.
(2) TA = 25°C @ IO=3.0A and VRWM for ten 8.3mS surges at 1 minute intervals.
(3) PCB = FR4, 0.0625 Inch (1.59mm) thick, single layer, 1.0-Oz Cu, Pad Size, (1.0” x 1.0”), (645mm x 645mm) , horizontal in still air.
(4) PCB = FR4, 0.0625 Inch (1.59mm) thick, single layer, 1.0-Oz Cu, Pad Size, (0.070” x 0.155”)‡, (1.78mm x 3.94mm) ‡, horizontal in still air.
IO1 is rated at 1.5A @ TA = 55°C for PC boards where R_θJA(PCB) ≤ 120°C/W. Derate at 12.5mA/°C above TA = 55°C in this case.
‡ Recommended solder pad layout dimensions for this device, as detailed within this datasheet for the D-5B device.
Semelab plc reserves the right to change test conditions, parameter limits and package dimensions without notice.
Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However
Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to
verify that datasheets are current before placing an order.
Semelab plc
Telephone [phone]
Email: [e-mail]
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Fax [phone]
Website: http://www.semelab-tt.com
Document Number 9036
Issue 2
Page 1 of 4