1N4106CSM Datasheet, PDF (1/1 Pages) Seme LAB – ZENER DIODE IN A

1N4106CSM
MECHANICAL DATA
Dimensions in mm(inches)
0.51 ± 0.10
(0.02 ± 0.004)
0.31
(0.012)
rad.
3
2
1
1.91 ± 0.10
(0.075 ± 0.004)
3.05 ± 0.13
(0.12 ± 0.005)
0.31
(0.012)
rad.
A = ^{1.02 ± 0.10}
(0.04 ± 0.004)
LCC1 PACKAGE
(SOT23 Compatible)
A
1.40
(0.055)
max.
Underside View
Pad 1 – Anode
Pad 2 – N/C
Pad 3 – Cathode
ZENER DIODE IN A
CERAMIC SURFACE MOUNT
PACKAGE
FOR HI–REL APPLICATIONS
FEATURES
• HERMETIC CERAMIC SURFACE MOUNT
PACKAGE
• SCREENING OPTIONS AVAILABLE
ABSOLUTE MAXIMUM RATINGS
P_TOT
Power Dissipation
Derate above 25°C
T_AMB = 25°C
T_OP
T_STG
R_θJA
Maximum Operating Ambient Temperature
Storage Temperature Range
Thermal Resistance Junction to Ambient
500mW
2.85mW/°C
–65 to +200°C
–65 to +200°C
350°C/W
ELECTRICAL CHARACTERISTICS (T_A = 25°C unless otherwise stated)
Parameter
Test Conditions
Min.
V_ZT
V_FT
Z_ZMT^*
I_ZM
I_R
α_VZ
Zener Voltage
I_ZT = 250µA @ T_A
Forward Voltage
I_F = 200mA
Maximum Regulator Impedance I_ZT = 250µA @ T_A
Maximum Rated Current
P_TOT = 500mW , V_ZT = 12.6V
Reverse Current
V_R = 9.12V
Temp Coefficient of Zener Voltage
11.4
Typ.
12.0
1.1
Max. Units
12.6
V
200
39.5
0.05
0.065
Ω
mA
µA
%/°C
* _{ZZMT, the zener impedance is derived from the 1kHz voltage created when an AC current with RMS value of ± 10%}
of DC zener test current is superimposed on the test current.I_ZT
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Semelab plc. Telephone [phone]. Fax [phone].
E-mail: [e-mail] Website: http://www.semelab.co.uk
Document Number 3586
Issue 1