SGSC34063 Datasheet, PDF (4/6 Pages) SeCoS Halbleitertechnologie GmbH – Universal DC To DC Converter

Elektronische Bauelemente
Application Circuit
(1) Step-Up Converter
SGSC34063
Universal DC To DC Converter
Test
Line Regulation
Load Regulation
Output Ripple
Efficiency
Output Ripple With Optional Filter
Conditions
Vin = 8V to 16V, Io = 175mA
Vin = 12V, Io = 75mA to 175mA
Vin = 12V,Io = 175Ma
Vin = 12V, Io = 175mA
Vin = 12V, Io = 175mA
External Current Boost Connections for Ic Peak Greater than 1.5A
Results
30mV = ± 0.05%
10mV = ± 0.017%
400mVp-p
87.7%
40mVp-p
External NPN Switch
External NPN Saturated Switch (NOTE)
NOTE ΚIf the switch is driven into hard saturation (non-Darlington configuration) at low switch currents ( 300mA) and high driver currents ( 30mA)Δit may
take up to 2.0 us to come out of saturation. This condition will shorten the off time at frequencies 30kHz, and is magnified at high temperatures. This
condition does not occur with a Darlington configuration, since the output switch cannot saturate. If a non-Darlington configuration is used, the
following output drive condition is recommended.
http://www.SeCoSGmbH.com/
01-Jun-2002 Rev. A
Any changing of specification will not be informed individual
Page 4 of 5